TURBOSOUND : TCS62 TURBOSOUND

Arrayable 2 Way 6.5" Full Range Loudspeaker for Installation Applications
หมายเลขสินค้า : TCS62

ราคา 11,400.00 บาท

ราคาปกติ : 12,000.00 บาท

ประหยัดไป 600.00 บาท



เลือกจำนวน :

เลือกสี : สีดำ

  • สีดำ

  • ฟรี!

    ประกัน 1 ปี

  • ฟรี!

    ปรึกษาด้านเทคนิก


แชร์ไปยัง :

Arrayable 2 Way 6.5" Full Range Loudspeaker for Installation Applications
 
ลำโพง Arrayable Turbosound CONTRACTOR TCS62 เป็นตู้ลำโพง 2 ทาง ขนาดดอกลำโพง 6.5 นิ้ว LF driver, เสียงแหลม 1 นิ้ว HF Driver on a Converging Elliptical Waveguide , ทนกำลังขับ 175 W Continuous, 700 W Peak, Impedance 8 Ω, ตอบสนองความถี่ 60 Hz – 20 kHz ±3 dB
 
ATHENS TCS62
The 2 way full range TCS62 is a compact passive 6.5" 700 Watt arrayable loudspeaker system that is ideally suited for a wide range of speech and music sound reinforcement applications. Designed to work in conjunction with Turbosound loudspeaker management systems, the TCS62 provides optimal infill, front and downfill performance – and the compact size makes it an exceptional choice for under balcony and monitoring applications.
 
TCS62 arrayable loudspeaker features a carbon fibre loaded 6.5" low frequency driver with a low mass voice coil for improved transient response and an aluminium dome 1" neodymium motor compression driver mounted on a 100° horizontal by 60° vertical converging elliptical waveguide. When the waveguide is rotated 90° from the standard position, a 60° horizontal by 100° vertical dispersion is achieved, making TCS62 ideal for an even broader range of applications. All drivers are matched with an internal passive crossover network in a reflex-loaded enclosure. The rear panel connector plate carries Neutrik speakON* NL4 and barrier strip connectors for input and link connections to additional enclosures.
 
Finished in a highly durable semi matt black paint, the cabinet is constructed from 12 mm (½") birch plywood – and includes a rugged powder coated perforated steel mesh grille backed with reticulated foam. Internal M8 and M6 threaded rigging points are provided for suspension in any orientation, or mounting with dedicated brackets – available separately.
 
Architecture & Engineering Specifications
The speaker shall be of the full range, two-way passive type consisting of one 6" (162 mm) LF driver and one 1" (25 mm) HF compression driver. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 60 Hz to 20 kHz and within -10 dB from 50 Hz to 20 kHz. Nominal dispersion, at -6 dB points, shall average 100° H x 60° V, rotatable. Nominal impedance shall be 8 Ohms. Power handling shall be 175 Watts continuous, 700 Watts peak. Sensitivity, measured on axis, mean averaged over stated bandwidth, shall be 90 dB, 1 Watt @ 1 metre. Maximum SPL (peak), measured at 1 metre with music program at stated amplifier input, shall be 118.5 dB. Dimensions: 224 mm high x 402 mm wide x 198 mm deep (8.8" x 15.8" x 7.8"). Net weight: 6.9 kg (15.2 lbs). The loudspeaker system shall be the Turbosound TCS62. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equaled or exceeded.

Features :
  • Arrayable 2 way full range loudspeaker for installation applications
  • 175 Watts continuous, 700 Watts peak power
  • Carbon fibre loaded 6.5" low frequency driver with low mass coil for improved transient response
  • Aluminium dome 1" neodymium motor compression driver
  • Rotatable converging elliptical waveguide provides 100? H x 60? V dispersion
  • Multiple array configurations for extended coverage
  • Trapezoidal cabinet shape enables visually unobtrusive loudspeaker arrays
  • Multiple internal rigging points allow bracket mount and suspension in any orientation
  • 12 mm (5/8") birch plywood enclosure with hard wearing semi matt black paint finish
  • Architecturally styled powder coated perforated steel mesh grille
  • Neutrik speakON* NL4 and barrier strip connectors
  • Designed and engineered in the U.K.

System :
  • Frequency Response:
    • 60 Hz - 20 kHz ±3 dB
    • 50 Hz - 20 kHz -10 dB
  • Nominal Dispersion: 100° H x 60° V @ -6dB points, rotatable
  • Directivity Factor (Q): 12.8
  • Directivity Index (DI): 11.1
  • Power Handling (IEC):
    • Passive: 175 W continuous, 700 W peak
    • Sensitivity: 90 dB (1 W @ 1 m)
  • Maximum SPL:
    • Passive: 112.5 dB continuous, 118.5 dB peak
  • Impedance:
    • Passive: 8 O
  • Crossover Type: Passive
  • Components:
    • 1 x 6" (162 mm) LF driver
    • 1 x 1" (25 mm) HF compression driver
Enclosure :
  • Connectors:
    • 1 x Neutrik speakON* NL4
    • 1 x barrier strip terminals
  • Wiring:
    • Passive: Pins 1+ / 1- input, pins 2+ / 2- link
  • Dimensions (H x W x D): 224 x 402 x 198 mm (8.8 x 15.8 x 7.8")
  • Net Weight: 6.9 kg (15.2 lbs)
  • Construction: 12 mm (½") birch plywood
  • Finish: Semi matt black paint
  • Grille: Powder coated perforated steel
  • Flying Hardware: M8 X 8, M6 X 2 points