48x16 XLR In/Out Portable GX Expander with DX Sockets
Expander 96 kHz มีแชแนลถึง 48 แชแนล และ 16 XLR line out
GX4816 is a 96kHz audio expander that provides high-input-count remote expansion for SQ, Avantis and dLive mixing systems, and for the AHM-64 audio matrix processor.
Each GX4816 is loaded with 48 dLive mic preamps with independent Phantom Power LED indicators, plus 16 XLR line outputs. Additionally, 2 DX ports are provided for connection to up to 4 DX Expanders for further I/O expansion. Connection to a ME Personal Mixing System is possible via the DX2 socket when used with SQ or Avantis.
GX4816 connects via a single Cat5e cable to an SLink socket on a SQ, Avantis or AHM-64, or to a gigaACE audio network card on a dLive system.
Connection to DX Expanders and the ME Personal Mixing System is also over Cat5e cable.
Features :
-
48 Mic Preamps on XLR with Phantom Power status LEDs
-
16 XLR Line Outs
-
96kHz operation
-
DX1 Port – compatible with a single DX32, or up to 2 DX168/DX164-W expanders
-
DX2/ME Port – compatible with a single DX32, up to 2 DX168/DX164-W expanders, or a ME personal monitoring system (not compatible with AHM-64 or dLive).
-
Compatible with SQ, Avantis, AHM-64 and dLive (dLive requires firmware V1.86 onwards)
-
Multiple GX4816 can be added to a system:
-
Up to 2 GX4816 units can be added to a SQ system
-
Up to 3 GX4816 units can be added to an Avantis system
-
Up to 5 GX4816 units can be added to a dLive S Class system
-
Up to 3 GX4816 units can be added to a dLive C Class system
-
Rack-mounted (5u) or shelf/floor operation
-
Plug and Play – no IP addressing required
-
Compatible with CAT5e (or higher) cables of up to 100m
-
Locking EtherCon ports
Inputs
Mic/Line XLR Inputs: Balanced XLR, +48V Phantom Power
Mic/Line Preamp: Fully Recallable
Input Sensitivity: -60 to +15 dBu
Analog Gain: +5 to +60 dB, 1 dB Steps
Pad: -20 dB Active Pad
Maximum Input Level: +30 dBu (Pad In)
Input Impedance: >4 kOhms (Pad Out), >10 kOhms (Pad In)
Mic EIN: -127 dB with 15-Ohm Source
Phantom Power Indication: Per Socket, Internal or External Phantom Power Sensing, Triggered at 24 V
Outputs
Analog XLR Outputs: Balanced, Relay Protected
Output Impedance: <75 Ohms
Nominal Output: +4 dBu = 0 dB Meter Reading
Maximum Output Level: +21 dBu
Residual Output Noise: -95 dBu (Muted, 22 Hz to 22 kHz)
Temperature : Operating Temperature Range: 32 to 104°F / 0 to 40°C
Power : Mains Voltage Operating Range: 100 to 240 VAC, 50/60 Hz / Mains Power Consumption: 80 W Maximum
Dimensions (W x D x H) : 18.9 x 10.0 x 9.0" / 48.0 x 25.4 x 22.8 cm
Weight : 17.6 lb / 8.0 kg
Packaging Info
Package Weight 22.595 lb
Box Dimensions (LxWxH) 22 x 14.4 x 13.7"