TURBOSOUND : NuQ118B-WH TURBOSOUND

18" Band Pass Subwoofer for Portable PA and Installation Applications (White)
หมายเลขสินค้า : NuQ118B-WH

ราคา 31,000.00 บาท



เลือกจำนวน :

เลือกสี : สีขาว

  • สีขาว

  • ฟรี!

    ประกัน 1 ปี

  • ฟรี!

    ปรึกษาด้านเทคนิก


แชร์ไปยัง :

18" Band Pass Subwoofer for Portable PA and Installation Applications (White)
 
ลำโพงซับเบส Turbosound NuQ118B สีขาว มีขนาดดอกลำโพง 18 นิ้ว (460 mm) LF driver  ทนกำลังขับ 600 W continuous, 2,400 W peak  Impedance 8 Ω ตอบสนองความถี่ 40 Hz – 150 Hz ± 3 dB มีค่า Maximum SPL อยู่ที่ 128 dB continuous 134 dB peak
 
NuQ118B-WH
The 2,400 Watt NuQ118B-WH is an 18" dual ported bandpass enclosure that is optimally tuned for extended low frequency response. Engineered to work in conjunction with TURBOSOUND loudspeaker management systems, the NuQ118B-WH provides very high output FOH performance and is ideally suited for a wide range of music and live sound reinforcement applications.
 
The NuQ118B-WH features a powerful, double suspension 18" low frequency driver that utilizes a specialised inside/outside wound voice coil for higher magnetic density, better heat dissipation, high power handling capacity, and improved efficiency. For its size and operating bandwidth, the NuQ118B-WH delivers extremely high output that is virtually distortion-free – even in the most demanding applications.
 
Finished in a highly durable semi matt white paint, the cabinet is constructed from 18 mm (¾ ") birch plywood and includes: multiple threaded rigging points; a 35 mm pole socket; integrated carry handles for convenient transport – and high impact interlocking corners for ground stacking stability. The rear panel connector plate carries Neutrik speakON* NL4 connectors, with switchable input and link connections to accommodate standalone subwoofer applications, or subwoofer and satellite speaker connectivity via 4 core speaker cabling.
 
Architecture & Engineering Specifications
The speaker shall be of the passive subwoofer type consisting of one 18" (460 mm) LF driver. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 40 Hz to 150 Hz and within -10 dB from 33 Hz to 150 Hz. Nominal dispersion shall be “half space.” Nominal impedance shall be 8 Ohms. Power handling shall be 600 Watts continuous, 2,400 Watts peak. Sensitivity, measured on axis, mean averaged over stated bandwidth, shall be 100 dB, 1 Watt @ 1 metre. Maximum SPL (peak), measured at 1 metre with music program at stated amplifier input, shall be 134 dB. Dimensions: 773 mm high x 700 mm wide x 579 mm deep (30.4" x 27.6" x 22.8"). Net weight: 56.5 kg (124.6 lbs). The loudspeaker system shall be the TURBOSOUND NuQ118B-WH . No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equaled or exceeded.

Features :
  • Band pass subwoofer for portable PA and installation applications
  • 600 Watts continuous, 2,400 Watts peak power
  • Double suspension 18" low frequency driver with inside/outside wound coil
  • Low distortion dual port design for maximum sound pressure level
  • 18 mm (3/4?) birch plywood enclosure with hard wearing semi matt white paint finish
  • Integral M10 rigging points for ease of installation
  • 35 mm pole mount to support satellite speaker
  • Neutrik speakON* NL4 connectors for reliable long life operation
  • Designed and engineered in the U.K.

System :
  • Frequency Response:
    • 40 Hz – 150 Hz ± 3 dB
    • 33 Hz – 150 Hz - 10 dB
  • Nominal Dispersion: Half space
  • Power Handling (IEC): 600 W continuous, 2,400 W peak
  • Sensitivity: 100 dB (1 W @ 1 m)
  • Maximum SPL: 128 dB continuous, 134 dB peak
  • Impedance: 8 O
  • Components: 1 x 18" (460 mm) LF driver
Enclosure :
  • Connectors: 2 x Neutrik speakON* NL4
  • Wiring:
  • Dimensions (H x W x D): 773 x 579 x 700 mm (30.4 x 22.8 x 27.6")
  • Net Weight: 56.5 kg (124.6 lbs)
  • Construction: 18 mm (¾") birch plywood
  • Finish: Semi matt white paint
  • Grille: N/A
  • Flying Hardware: M10 x 16 points