TOA : SX-2100AI TOA

Audio Input Unit for TOA´s Matrix System
หมายเลขสินค้า : SX-2100AI

ราคา 170,650.00 บาท

ราคาปกติ : 189,600.00 บาท

ประหยัดไป 18,950.00 บาท

*ราคาไม่รวมภาษีมูลค่าเพิ่ม 7%



เลือกจำนวน :

เลือกสี : สีดำ

  • สีดำ


แชร์ไปยัง :

Audio Input Unit for TOA's Matrix System

 

The SX-2100AI is an audio input of the matrix system and can be mounted in an EIA equipment rack (2U size). Multiple units can be decentralized in a whole system. It features modular construction that allows it to handle from two to eight inputs per unit. Audio signals are transmitted digitally to the audio output unit, but an analog audio output function (1 channel) enables simultaneous all-zone calls for use in emergency situations. Audio input levels are indicated on the level meters provided for each input channel. Volumes can be adjusted for each channel using the volume controls on the front panel or the SX-2000 software. The volume controls can be locked. Any input channel can be monitored using the internal speaker. It is also equipped with 16 control inputs, and 16 control outputs. It is equipped with two power inputs, allowing for a redundant power system.

Power Source

Usable power supply unit: VX-200PS
24 V DC (operational range: 20 V - 40 V DC)
Two power inputs construction enables dual- redundant power supply.

Current Consumption

2.01 A or less (maximum value in the power operating range)
1.50 A or less (when operated on 24 V DC)
Note: But except current consumption of the external equipment of which power is supplied
from the unit.

Indication

18 alphanumeric characters, Level indication (8 inputs, monitor), Status indicators,
POWER indicator, STANDBY indicator, CPU OFF indicator

Operation

Function button, Input level control, Monitor speaker volume control, ON/OFF switch,
Operation button

Audio Input

8 inputs, module construction (max. 4 modules, modules optional)
monitoring possible using built-in speaker.

Audio Input Characteristic

Sampling frequency: 48 kHz

No. of Connectable Remote Microphone

Max. 8

Power Feed to Remote Microphone

Possible for up to a total of 8 A.

 

SX Link

Network I/F

2 100BASE-TX circuits, RJ45 connector, decentralized installation possible

Connection Cable/Device

Shielded Category 5 twisted pair cable (CAT5-STP)
To be connected via the switching hub specified by TOA
Note: This network must be made completely independent from other LAN.

Maximum Cable Distance

100 m (32.81 ft) (between this unit and a switching hub)

 

Analog Link

Input/Output Connector

Input: 1 input, RJ45 connector
Output: 1 output, RJ45 connector

Connection Cable

Shielded Category 5 twisted pair cable (CAT5-STP)
(1 pair of audio wire + 1 pair of control wire (CPU OFF) +
1 pair of control wire (system reset/standby) + 1 pair of connection check wire)

Maximum Cable Distance

Total length of analog link: 800 m (874.89 yd)

 

Control Input

16 inputs, no-voltage make contact input, open voltage: 40 V DC or less,
short-circuit current: 2 mA, photo coupler input, removable terminal block (16 pins)

Control Output

16 outputs, Form A contact: normally open (changeable to Form B contact:
normally closed), no-voltage make contact output, relay contact output (withstand voltage:
40 V DC, control current: 2 - 300 mA), removable terminal block (16 pins)

Operating Temperature

0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)

Operating Humidity

35 % to 80 %RH (no condensation)

Finish

Panel: Aluminum, black, alumite
Case: Surface-treated steel plate

Dimensions

482 (W) × 88.4 (H) × 349 (D) mm (18.98" × 3.48" × 13.74")

Weight

7.2 kg (15.87 lb)

Accessory

Removable terminal plug (4 pins) …1, Removable terminal plug (16 pins) …4,
Rack mounting screw …4