Designed to provide basic amplification and sound system.
เครื่องขยายเสียงรุ่น Bose : FreeSpace ZA 2120-LZA ถูกออกแบบมาเพื่อใช้ในการขยายสัญญาณพื้นฐานและระบบเสียง เมื่อใช้ควบคู่กับ AmpLink สามารถเพิ่มช่องเสียงดิจิตอลได้ถึง 8 ช่องเสียง
The Bose® FreeSpace® ZA 2120-LZA zone amplifier is designed to provide basic amplification and sound system expansion when using front-end Bose products such as FreeSpace® integrated zone amplifiers and ControlSpace® engineered sound processors. With the inclusion of AmpLink, up to 8 digital audio channels can be sent to the amp from a Bose DSP via a shielded CAT 5 cable.
Features :
-
Reliable 2 x 120 W Class-D amplification optimized for low-impedance applications.
-
AmpLink transports up to 8 uncompressed, near zero latency, digital audio channels between Bose DSPs and the ZA 2120-LZA via shielded CAT 5 cable. The amp also supports a THRU path for daisy-chaining digital audio to other Bose AmpLink products at a distance of up to 10 m between products.
-
Remote option for volume control eliminates the need for bulky, inefficient, and sound-altering in-line volume controls.
-
Expansion-ready connectivity with FreeSpace® IZA amplifiers and ControlSpace® engineered sound processors when additional sources and loudspeaker processing is required.
-
Intuitive feature setup enables the amplifier to be configured without a PC for input, output and automatic standby options.
-
Auto-Standby feature allows the amplifier to consume less power when not in use.
-
Remote muting allows the amplifier to be muted via a centralized control system.
Applications :
-
Retail stores
-
Restaurants and bars
-
Hospitality venues
-
Conference centers
-
Schools
-
Auxiliary zones
Power Rating :
-
Amplifier Power 2 x 120 W @ 4 Ω, 2 x 60 W @ 8 Ω
Audio Performance :
-
Frequency Response : 20 Hz - 20 kHz (+0/–3 dB, @ 1 W reference 1 kHz)
-
THD+N : ≤ 0.5 % (at rated power)
-
Channel Separation (Crosstalk) : ≤ –58 dBu (below rated power, 1 kHz)
-
Dynamic Range : 88 dB
-
Audio Latency : 1 ms (any analog input to loudspeaker output); 1.5 ms (AmpLink input to loudspeaker output)
Audio Inputs :
-
Input Channels : In Analog 1 unbalanced, and In Amplink 1 balanced 8 digital
-
Connectors : In Analog Stereo RCA, 5-pin Euroblock and In Amplink RJ-45 (Input)
-
Input Range : –8 dBu to 22 dBu
-
Input Impedance : 20 kΩ
-
Maximum Input Level : 22 dBu
-
Nominal Input Level : 4 dBu
Audio Outputs :
-
Outputs : In Analog 2, and In Amplink 8 digital
-
Connectors : In Analog 2-pin inverted Euroblock, and In Amplink RJ-45 (Thru)
-
Nominal Output Level : 2 x 120 W @ 4 Ω, 2 x 60 W @ 8 Ω
Indicators And Controls :
-
Power LED : Solid blue indicates power is on, blinking blue indicates standby mode.
-
Input Signal Clip LED : Green indicates input signal is within –37 dBu to 11 dBu, red indicates signal is over 11 dBu.
-
Output Signal Clip LED : Green indicates output signal is within –46 dBFS to –2 dBFS, red indicates signal is over –2 dBFS, approximately 80 W/channel, for each output 120 watts is 0dBFS.
-
AmpLink ERR LED : Solid yellow indicates muted audio from the mute connector. Blinking yellow indicates an error, which will also mute the audio.
-
AmpLink LNK LED : Solid green indicates normal operation.
-
Controls, Front Panel : Power On/Off
-
Controls, Rear Panel : Auto Standby: On/Off switch, Output: Stereo/Mono switch, Mute, Output trims, Remote RJ-45
Electrical :
-
Mains Voltage : 100 VAC - 240 VAC (±10%, 50/60 Hz)
-
AC Power Consumption : 13 W (Standby), 300 W (Max)
-
Mains Connector : Standard IEC (C14)
-
Maximum Inrush Current : 12.6 Amps (230 VAC / 50 Hz), 7.8 Amps (120 VAC / 60 Hz)
-
Overload Protection : High temperature, output short, excessively low or high AC line voltage
Physical :
-
Dimensions (H x W x D) : 1.7" H x 19.0" W x 12.8" D (44 mm x 483 mm x 324 mm)
-
Shipping Weight : 11.5 lb (5.2 kg)
-
Net Weight : 9.0 lb (4.1 kg)
-
Cooling System : Single fan creates continuous left-to-right air flow
General :
-
Inputs (Control) : 1 RJ-45 remote input for a CC-1 ControlCenter zone controller. Mute input control via a normally open contact closure
Technical Information :
Manuals :