IK Multimedia : AXE I/O Solo IK Multimedia

AXE I/O Solo 2-in / 3-out USB audio interface, 24-bit, 192 kHz sound quality, Ultra-low noise floor for high-gain recording
หมายเลขสินค้า : AXE I/O Solo

ราคา 11,900.00 บาท


  • สินค้าหมดชั่วคราว
  • *กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144

เลือกจำนวน :

เลือกสี : สีดำ

  • สีดำ

  • ฟรี!

    ประกัน 1 ปี

  • ฟรี!

    ปรึกษาด้านเทคนิก


แชร์ไปยัง :

AXE I/O Solo : A truly high-end audio interface for everybody
 
ออดิโออินเตอร์เฟสสำหรับกีต้าร์แบบ 2 in/3 out ใช้การเชื่อมต่อด้วย USB มีค่าความละเอียดสูงสุดอยู่ที่ 24-bit, 192 kHz มาพร้อมกับปรีแอมป์ไมโครโฟนคุณภาพสูงแบบ Class A มีค่า noise ต่ำแม้จะปรับค่า gain สูงก็ตาม
 
The IK Multimedia AXE I/O solo is a compact audio interface designed specifically for use with guitar, great for turning all those riffs into full-blown tracks. With an input channel intended for Hi-Z guitar and bass signals, it is a perfect way to get your axe's sound straight into your interface with color and character. It works great for direct tracking into a DAW, but comes to life when used with virtual amp and effect modeling software.
 
The guitar input channel allows for easy connection from your instrument. With a selection of Pure or JFET drive stage, you can capture your sound with absolute uncolored clarity or with extra warmth. This channel also allows you to switch between Active or Passive modes, making the most of your signal no matter what style of pickups you use. And, perhaps one of the nicer touches—this channel features adjustable impedance, making it possible to further optimize the relationship between your instrument and the virtual world. Additionally, this interface features another input channel on a combo XLR-1/4" input jack, making it easy to record external microphones or other instruments. This channel features a Class A mic preamp and switchable phantom power, making it perfect for use with any sound source. When used in combination with the reamp output, this becomes a stellar way of recording the sound of a real amplifier—or simply for inserting external effects into your signal path.
 
The AXE I/O Solo has independent monitor and headphone outputs for adding external monitors or your choice of monitoring headphones. It also allows for footswitch control, and offers standard 5-pin DIN MIDI Input and Output, making it an ideal choice for interfacing with your external synths or drum machines. If you're looking for a powerful all-in-one tool for recording that will preserve and enhance the sound of your guitar, this is the perfect interface for you.




Features :
  • 2-in / 3-out USB audio interface
  • ACTIVE/PASSIVE pick-up selector
  • PURE and JFET input stages
  • Z-Tone® impedance-adapting circuit
  • Amp Out with ground loop interrupter
  • High-resolution, Class A mic preamp
  • 24-bit, 192 kHz sound quality
  • Wide frequency response ideal for instruments
  • Best-in-class analog/digital conversion
  • Ultra-low noise floor for high-gain recording

Common :
  • AD and DA Resolution: 24-bit
  • Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz
  • Host Connection: USB Type-B receptacle. USB 2.0 (High Speed)
Line Outputs 1-2 (Monitor) :
  • Configuration: Electronically balanced and floating, automatically compensates level when connection is balanced or unbalanced, tip hot.
  • Output impedance: 150 Ohms balanced, 75 Ohms unbalanced
  • Output Level: 0 dBFS corresponds to +13.5 dBu
  • Frequency response: From 1 Hz to 46 kHz within 0.5 dB (96 kHz sample rate)
  • Dynamic Range: 113 dB(A)
  • THD @ -1 dBFS: 0.001%
  • THD+N: -103 dB(A) at -1 dBFS
  • Channels 1-2 crosstalk: 112 dB(A)
  • Output 3 (Amp output)
Configuration: Unbalanced, floating, with selectable ground lift :
  • Output impedance: 75 Ohms
  • Output Level: 0 dBFS corresponds to -3 dBu
  • Frequency response: From 20 Hz to 42 kHz within 0.5 dB (96 kHz sample rate)
  • Dynamic Range: 106 dB(A)
  • THD+N: -93 dB(A)
Headphones Out :
  • Output impedance: Virtually ideal source (zero Ohms) until clipping
  • Maximum Output level: +9 dBu into 50 Ohms load (approx 95 mW)
  • Frequency response: From 1 Hz to 42 kHz within 0.5 dB (96 kHz sample rate)
  • Dynamic Range: 111 dB(A)
  • THD+N: -102 dB(A)
Instrument Input :
  • Configuration: Multiple topology instrument preamp
  • Input impedance, PASSIVE mode: Variable from 1 MOhms down to 2.2 kOhms
  • Input impedance, ACTIVE mode: 10 kOhms
  • Input level, min gain: 0 dBFS is obtained with a +12.5dBu signal at the TS input
  • Input level, max gain: 0 dBFS is obtained with a -19 dBu signal at the TS input
  • Frequency response: From 6 Hz to 42 kHz within 0.5 dB (96 kHz sample rate)
  • Dynamic Range: 117 dB(A)
  • THD, PURE mode: 0.002 % (-1dBFS input)
  • THD, JFET mode: 0.5 %
Mic Input :
  • Configuration: Class-A discrete differential microphone preamp, pin 2 hot
  • Input impedance: 4 kOhms differential
  • Input level, min gain: 0 dBFS is obtained with a +9 dBu signal at the XLR input
  • Input level, max gain: 0 dBFS is obtained with a -44 dBu signal at the XLR input
  • Frequency response: From 7 Hz to 32 kHz within 0.5 dB (96 kHz sample rate)
  • Dynamic Range: 116 dB(A)
  • THD+N: -104 dB(A) at -10 dBFS
Line Input :
  • Configuration: Class-A discrete differential line receiver, tip hot
  • Input impedance: 20 kOhms differential
  • Input level, min gain: 0 dBFS is obtained with a +26 dBu signal at the TRS input
  • Input level, max gain: 0 dBFS is obtained with a -27 dBu signal at the TRS input
  • Frequency response: From 7 Hz to 32 kHz within 0.5 dB (96 kHz sample rate)
  • Dynamic Range: 117 dB(A)
  • THD+N: -104 dB(A) at -10 dBFS
Connections and Controls :
  • Front Panel
  • One 1/4" instrument input jacks
  • Two analog potentiometers for Input GAIN
  • Two 5 segments input level meter (peak)
  • Analog potentiometers for Z-Tone control
  • Pick-Up selector (PASSIVE/ACTIVE)
  • Preamp topology selector (JFET/PURE)
  • +48V phantom power switch
  • USB LEDS
  • MIDI IN/OUT LEDs
  • Monitor knob
  • 1/4" headphones output jack
  • Master potentiometer for main output control
  • 1/4" Amp output jack
Rear Panel :
  • MIDI I/O 5-pin DIN connectors
  • B-Type USB socket for connecting a computer (Mac/PC)
  • 2 x 1/4" TRS External controllers sockets
  • 2 x 1/4" TRS Balanced floating line outputs
  • 1 Combo socket for MIC input and Line input (auto selecting)
Package includes :
  • AXE I/O SOLO
  • USB A-Type to USB B-Type connection cable (1.5m/4.32ft)
Dimensions :
  • Size: 19.5cm x 19.5cm x 5.3cm
  • Weight: 1.0kg
Compatibility :
  • Computers : 64-bit application. Requires a 64 bit CPU and Operating System.
  • Mac® (64-bits) Minimal: macOS 10.11 or later. One free USB port.
  • Windows® (64-bits) Minimal: Windows 7 or later. One free USB port

ไม่พบข้อมูล