KLARK TEKNIK : EQP-KT KLARK TEKNIK

Classic Tube Equaliser with Switchable Frequency Selection, Variable Bandwidth and Custom-Built Midas Transformers
หมายเลขสินค้า : EQP-KT

ราคา 13,000.00 บาท


  • สินค้าหมดชั่วคราว
  • *กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144

เลือกจำนวน :

เลือกสี : สีเงินอลูมิเนียม

  • สีเงินอลูมิเนียม

  • ฟรี!

    ประกัน 1 ปี

  • ฟรี!

    ปรึกษาด้านเทคนิก


แชร์ไปยัง :

Classic Tube Equaliser with Switchable Frequency Selection, Variable Bandwidth and Custom-Built Midas Transformers
 
Klark Teknik EQP-KT สร้างตามอีควอไลเซอร์ในตำนานอย่าง Pultec EQP-1A
 
EQP-KT เป็นอีควอไลเซอร์แบบ Vintage ใช้วงจร Class-A สร้างด้วยวัสดุคุณภาพสูงที่เทียบเท่าหรือคุณภาพสูงกว่าต้นฉบับ ใช้ Tube ที่คัดเลือกมาอย่างดีแล้วอย่าง 12AX7 และ 12AU7 นอกจากนั้นยังมี Midas transformer อีกด้วย
 
If ever there is an official “Audio Technology Hall of Fame”, it will definitely include a shrine to the legendary Pultec EQP-1A. We pay homage to this audio-processing pioneer that has graced so many recordings, with our EQP-KT Classic Tube Equaliser. And while vintage Pultec units are extremely rare and expensive, the EQP-KT is amazingly affordable – and designed for the 21st Century. Mastering quality equalisation, at a price point that makes the EQP-KT equally at home in your studio – and your live rack!
 
Building on a Classic
The EQP-KT draws inspiration from the legendary Pultec EQP-1A equaliser, which was first produced in the early 1950s. Since then, Pultec equalisers have been prized for their smooth musical sound, and audio engineers have utilised them at all stages of the recording process – from tracking to mastering.
 
A Class Act
At the heart of the EQP-KT is a vintage Class-A circuit design constructed from the highest-quality discrete components – all of which meet or exceed the Pultec EQP-1A’s original specifications. This is just one of the many ways the EQP-KT brings unparalleled precision and superb signal integrity into the new audio age.
 
The Warm Sound of Tubes
EQP-KT owes its characteristic warmth to a set of premium, hand-selected 12AX7 and 12AU7 tubes. This time-tested combination provides ultra low-noise analog output with the ideal balance of tight, warm bass, silky-smooth midrange and brilliant, airy treble.
 
MIDAS – The Legend in Sound Quality
Ever since its formation in the 1970s, MIDAS has had a long history of innovation and leadership in the world of audio mixing consoles. Employed by the most famous touring acts and installations worldwide, legendary MIDAS consoles such as the XL4 and Heritage H3000 quickly became industry standards.
 
MIDAS has earned an impeccable reputation due to their no-compromise approach for audio and build-quality, and in particular for their Award-winning Mic Preamps, considered by experts as the industry’s best-sounding designs. Building on this legacy, the XL8 and PRO Series of Live Mixing Systems continue this great heritage of Award-winning audio quality.
 
KLARK TEKNIK is proud to incorporate custom-designed MIDAS Input and Output transformers in the EQP-KT for the ultimate in high-quality audio reproduction in both live and studio environments. Find out more about MIDAS’ amazing legacy by visiting their extensive website.
 
Incredible Flexibility
EQP-KT provides the kind of tone-sculpting flexibility that you simply won’t find on the average equaliser, such as the ability to boost and cut specific frequency content simultaneously. This functionality is a product of EQP-KT’s two-band design, which allows the boost and cut controls to work independently of one another – for incredibly flexible shelving. Both the LF Boost/Cut and HF Boost controls provide 7 frequency selections, along with a variable broad-bandwidth midrange control. Finally, EQP-KT’s HF Cut control lets you dial in the perfect amount of “air” to add a touch of finesse to your top-end content.
 
Bypass Mode
As mentioned earlier, the EQP-KT is anything but typical, and that includes the operation of its Bypass/EQ On switch. If you could see EQP-KT’s signal path, you’ll find: a MIDAS Input transformer; two-band equaliser; a makeup gain amplifier; and a MIDAS Output transformer. When the switch is in the Bypass position, the only section that is no longer part of the signal path is the equaliser.
 
Balanced Connections
The EQP–KT has both XLR and 1/4" TRS balanced Inputs and Outputs, both of which operate at line level. Unbalanced connections are also available via 1/4" TS cables
 
Unequalled Equalisation
While Pultec may have written the book on studio equalisation with the legendary EQP-1A in the 1950, we just added a new chapter to that venerable tone – the KLARK TEKNIK EQP-KT! Now audio aficionados of all means can afford the amazingly precise, tone-sculpting technology that has defined generations of musical excellence – both on and off the stage.
 


Features :
  • Single-channel, two-band equaliser based on the classic Pultec* EQP-1A
  • Class A, all discrete circuitry for highest signal integrity
  • Premium selection 12AX7 and 12AU7 tubes
  • Custom-built Midas input and output transformers
  • Switchable frequency selectors with up to 7 frequency points
  • Independent boost and cut controls provide immense creative potential
  • Variable bandwidth control for wide sound sculpting
  • Inductor based equaliser section
  • Bypass feature allows for A/B comparison
  • Transformer balanced inputs and outputs on Neutrik* XLR connectors
  • Rugged 2U rackmount chassis for durability in portable applications
  • Auto-ranging universal switch-mode power supply
  • 10-Year Warranty Program*
  • Designed and engineered in the U.K.

Audio Input
  • Type XLR, 1/4" TRS, transformer balanced
  • Impedance >600 Ω, balanced and unbalanced
  • Max. input level +21 dBu
  • Optimum input level +4 dBu
 
Audio Output
  • Type XLR, 1/4" TRS, transformer balanced
  • Min. output load impedance 600 Ω
  • Impedance <300 Ω, balanced and unbalanced
  • Max. output level +21 dBu
 
System Specifications
  • Frequency response 20 Hz to 20 kHz, ±1 dB
  • Distortion (THD+N) <0.1% @ 1 kHz, +4 dBu
  • Dynamic range >101 dB, typical
  • (20 Hz to 20 kHz unweighted)
  • S/N ratio 80 dB @ +4 dBu In
  • Circuit Class-A
  • Vacuum tubes 12AX7, 12AU7
 
Filters
  • Low Frequency Cut / Boost Section
  • Boost 0 to 12 dB, shelving
  • Cut 0 to -24 dB, shelving
  • LF boost / cut 20, 30, 60, 100, 200 ,400, 800 Hz, selectable
  • High Frequency Boost Section
  • Boost 0 to 12 dB, shelving
  • 0 to +10 dB (Broad)
  • HF boost 3, 4, 5, 8, 10, 12, 16 kHz, selectable
  • Bandwidth Q = 1 to 10 (sharp to broad), selectable
  • High Frequency Cut Section
  • Cut 0 to -20 dB, shelving
  • HF cut 3, 4, 5, 10, 20 kHz, selectable
 
Power Supply
  • Mains voltage 100 – 240 V~, 50/60 Hz
  • Power consumption 15 W
  • Fuse T1AH 250V
  • Mains connection Standard IEC receptacle
 
Physical
  • Dimensions (H x W x D) 88 x 483 x 167 mm (3.5 x 19 x 6.6")
  • Weight 3.0 kg (6.6 lbs)