Flush mount wall/ceiling microphone, Cardioid, 60 Hz – 10 kHz, 18 – 52 V phantom power
ไมโครโฟนคอนเดนเซอร์ติดตั้งแบบฝังกำแพงและเพดาน มีปรีแอมป์ในตัว ทำงานด้วย 18-52V Phantom power ตอบสนองความถี่ที่ 60 Hz – 10 kHz รูปแบบการรับเสียงแบบ Cardioid มาพร้อม metal mounting plate สำหรับติดตั้ง เหมาะสำหรับการ distant-miking, การประชุมทางวิดีโอ, การเรียนทางไกล, การใช้ในโรงพยาบาล และ การเฝ้าระวังความปลอดภัย
The GS1 is an innovative flush-mount wall or ceiling microphone designed for distance miking. Features include a fully integrated preamp, an extremely high sensitivity rating of 38 millivolts, and complete immunity from RF interference caused by cell phones and GSM devices.
The GS1 capsule is housed within a patented cradle that enables the microphone to be aimed up to an angle of 45 degrees towards the sound source. Its small footprint and flush-mount configuration allow the microphone to be unobtrusive without sacrificing sound quality.
The GS1 terminates in a terminal block connector and is easy to install into a standard single gang box. A 2.75″ by 4.5″ mounting plate is included. The GS1 comes in a stock satin nickel finish and is also available in white.
Feature :
-
High output for distance miking
-
Immunity from RF interference
-
Miniaturized integrated preamp circuitry
-
Includes x 2.75″ by 4.5″ metal mounting plate · No external power adapter
-
Point and shoot directivity
-
Designed, assembled & tested in the USA
-
3-year warranty
-
Transducer Type Condenser
-
Frequency Response 60 Hz – 10 kHz
-
Polar Pattern Cardioid
-
Output Impedance 150 ohms
-
Sensitivity 38 mV / Pascal @ 1k
-
Equivalent Noise Level 22 dB
-
Signal to Noise Ratio 72 dB
-
Maximum SPL ≥130 dB
-
Dynamic Range 108 dB
-
Power Requirements 18 – 52 V phantom
-
Connector 3-pin Phoenix fe
-
Polarity Positive pressure on diaphragm produces positive voltage on blue (center) Phoenix conductor
-
Materials / Finish Brass aluminum and steel White or Nickel
-
Weight Belden 9451 P or 82761
-
Length 176 mm / 6.9 in