PreSonus : Eris Sub8 PreSonus

100W Powered Studio Subwoofer with 8" Paper-composite LF Driver
หมายเลขสินค้า : Eris Sub8

ราคา 9,900.00 บาท



เลือกจำนวน :

เลือกสี : สีดำ

  • สีดำ

  • ฟรี!

    ค่าจัดส่งทั่วไทย

  • ฟรี!

    ประกัน 1 ปี

  • ฟรี!

    ปรึกษาด้านเทคนิก


แชร์ไปยัง :

100W Powered Studio Subwoofer with 8" Paper-composite LF Driver
 
นี่คือสุดยอด Studio Subwoofer ขนาด 8 นิ้ว มีกำลังขับที่ 100 วัตต์ รุ่นใหม่ล่าสุดจาก PreSonus ที่สามารถเชื่อมต่อได้ทั้งแบบ ¼ TRS และแบบ RCA ถ้าได้ไปใช้ควบคู่กับลำโพง Eris Monitor Series บอกเลยว่าลงตัวไม่ใช่น้อย
 
อัดแน่นมาด้วยฟังก์ชันมากมายไม่ว่าจะเป็น 
-Input Gain ที่ปรับได้ตั้งแต่ -30 dB ถึง +6 dB
-Lowpass Filter, Highpass Filter และ Polarity Invert
-มีย่านตอบสนองความถี่ตั้งแต่ 30 Hz – 200 Hz ให้ย่านเบสที่นุ่ม ลึก และฟังดูมีมิติ
 
ถูกดีไซน์ให้มีขนาดที่เล็ก สวย และดูเรียบง่าย จึงเหมาะมากๆกับทุกการใช้งานไม่ว่าจะเป็นการทำเพลง ไปจนถึงการเอาใจคนรักการดูภาพยนตร์และเล่นเกม เพราะถ้าคุณชอบความสั่นสะเทือนภายในห้อง มันจะทำให้ห้องธรรมดาของคุณถูกอัปเกรดเป็นโรงหนังขนาดย่อมได้เลย บอกเลยครับว่าเจ้า Eris Sub8 พร้อมตอบสนองทุกความต้องการของคุณแล้ว
 
The best subwoofer for Eris monitors.
The Eris Sub8 is the first subwoofer to join the lauded and best-selling Eris studio monitor line. We called it Eris because it’s been designed from the ground up to be part of the family; it compliments the voicing and frequency response of the modern Eris classics. Of course, they’ll play nice with other monitors, too, but if you’ve got a pair of Eris in your home or studio already, the Eris Sub8 is the single best subwoofer you can get to put a little boom in your room.
 
Maximize your frequency response and accuracy.
The surprisingly loud 100-Watt Eris Sub8 drops down to a molar-rattling 30Hz—a full 50Hz below the Eris 3.5s. This allows you to both rock harder and produce better mixes, as you’ll be hearing an accurate representation of your work. For EDM and hip-hop producers in particular, a sub is a must-have. The Eris Sub8 lets you naturally extend the reach of your Eris E3.5 or E4.5 monitors in a manner appropriate to smaller rooms; exactly where these monitors excel.
 
Total control and connectivity.
Thanks to robust configuration and I/O, you’ll be able to tailor your Eris Sub8 configuration exactly to your mixing and listening needs. You can connect your existing monitors via ¼” TRS or RCA, set the input level to your liking, and even invert the polarity. Most importantly, you get a High Pass Filter and a Low Pass Crossover control that ensures your Eris Sub8 starts working at the precise low-frequency point where your main monitors stop working. This makes sure you avoid the flubbery, smudged, low-end mess that one hears in redundant, duplicate, redundant bass reproduction that occurs without a crossover.
 



Features :
 
  • 8-inch, front-firing, paper-composite low-frequency transducer with high-elastisity rubber surround
  • Class AB amplifier: 100W peak (50W RMS) power
  • Input gain control (-30 dB to +6 dB, continuously variable)
  • Continuously variable lowpass filter (50 Hz to 130 Hz)
  • Defeatable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Eris Sub8 outputs to the main speakers
  • Left and right, balanced ¼-inch TRS and unbalanced RCA main inputs
  • Left and right balanced ¼-inch TRS and unbalanced RCA pass-through outputs for connecting satellite speakers
  • Polarity invert switch
  • Protection: RF interference, Output-current limiting, Over-temperature, Turn-on/off transient, Subsonic filter, External mains fuse

Inputs

 
 

2- Balanced ¼” TRS

2- Unbalanced RCA

Outputs

 
 

2- Balanced ¼” TRS (full range with 80 Hz HPF option)

2- Unbalanced RCA (full range with 80 Hz HPF option)

Performance

 
Frequency Response 30 Hz – 200 Hz
Low Pass Filter Frequency 50 – 130 Hz (variable)
Signal-to-Noise Ratio >95 dB (A weighted)
THD 0.05%
Amplifier Power 100W peak, 50W RMS
Power Consumption 100W
Amplifier Type Class AB
Peak SPL at 1m 113 dB
Woofer 8” paper-composite with high-elasticity rubber surround, front-firing
Acoustic Port Front-firing bass reflex

User Controls

 
Input Gain Range -30 to +6 dB
Polarity Switch 0° or 180°
Low Pass Filter Control 50 Hz to 130 Hz
High Pass Filter Switch On/Off

Protection

 
 

RF interference

Output-current limiting

Over-temperature

Turn-on/off transient

Subsonic filter

External mains fuse

Power

 
  100-120V ~50/60 Hz or 220-240V ~50/60 Hz

Cabinet

 
  Vinyl-laminated MDF

Physical

 
Width 9.8” (250 mm)
Depth 12.75” (324 mm)
Height 11.6” (295 mm)
Weight 16.3 lbs (7.4 kg)