ราคา 83,300.00 บาท
ราคาปกติ : 98,000.00 บาท
ประหยัดไป 14,700.00 บาท
4-Channel Rackmount Power Amplifier - 170W per channel at 8Ω
The QSC CX254 is a 4-channel power amplifier, designed primarily in support of fixed installation sound systems. The 2RU rackmountable unit is surprisingly lightweight, and provides a customized integrated security cover.
Designed for a space and energy efficient working life in a facility rack, QSC has equipped the CX254 with a varispeed fan cooling system, featuring rear to front airflow exiting through the front panel grill, and the uniquely efficient Powerwave technology for the switching power supply. The Powerwave design sends current to the amp's power circuitry by charging the supply rails a staggering 230,000 times a second via a very low impedance circuit. The result is a consistently clean signal, and efficient, predictable power distribution that contributes to lowered thermal heat buildup and improved signal reproduction.
The CX254 is loaded with rear panel controls and front panel indicators, including dedicated, detented rotary gain control knobs, LF filter switches, and clip protection activation. An HD15 Dataport is located on the rear panel for computer-integrated remote control and system updating, using QSCcontrol software.
The CX254 incorporates the design, cost-effective operation, and performance features that QSC is able to implement after three decades of experience building amplifiers serving all professional sound markets.
Features
SPECIFICATIONS | CX204V | CX254 | CX404 |
---|---|---|---|
POWER PER CHANNEL, STEREO MODE (all channels driven) | |||
8Ω, 20 Hz–20 kHz 0.05% THD | - | 170 W | 250 W |
4Ω, 20 Hz–20 kHz 0.05% THD | - | 250 W | 400 W* |
2Ω, 1 kHz 1% THD | - | 450 W | not recommended |
70 V, 20 Hz–20 kHz 0.05% THD | 200 W | - | - |
70 V, 1 kHz 0.05% THD | 220 W | - | - |
70 V, 1 kHz 1% THD | 300 W | - | - |
POWER, BRIDGED MONO MODE | |||
16Ω, 20 Hz–20 kHz 0.1% THD | - | 340 W | 500 W |
8Ω, 20 Hz–20 kHz 0.1% THD | - | 500 W | 800 W* |
4Ω, 1 kHz 1% THD | - | 900 W | not recommended |
140 V, 20 Hz–20 kHz 0.1% THD | 400 W | - | - |
140 V, 1 kHz 0.05% THD | 440 W | - | - |
140 V, 1 kHz 1% THD | 600 W | - | - |
Noise, 20 Hz–20 kHz | >106 dB | >106 dB | >105 dB |
Input Sensitivity | 1.26 V rms | 1.22 V rms | 1.22 V rms |
Maximum Voltage Gain | 35 dB | 29 dB | 31 dB |
Input Clipping | 10 V rms (+22 dBu) | 10 V rms (+22 dBu) | 10 V rms (+22 dBu) |
Output Circuitry Class | AB+B | AB+B | AB+B |
Distortion (SMPTE-IM) | Less than 0.02% | Less than 0.01% | Less than 0.01% |
ALL MODELS | |||
Distortion (Typical) 20 Hz–20 kHz: 10 dB below rated power 1.0 kHz and below: full rated power |
Less than 0.01% THD Less than 0.01% THD |
||
Frequency Response (typical) | 20 Hz–20 kHz, ± 0.2 dB 8 Hz–50 kHz, +0/-3 dB | ||
Damping Factor |
Greater than 500 (1 kHz and below)
|
||
Input Impedance |
6 kΩ unbalanced, 12 kΩ balanced
|
||
Cooling |
Variable speed fan, rear to front airflow through tunnel heat sink
|
||
Connectors, each channel |
Input: 3 position Euro-style detachable barrier block, channels 1, 2, 3, 4
DataPort: two HD-15 connectors—Ch 1+2, Ch 3+4 Output: Six-position barrier strip with monitor connections, Ch 1+2, Ch 3+4 |
||
Amplifier Protection |
Full short circuit, open circuit, thermal, ultrasonic, & protection. Stable into reactive or mismatched loads.
|
||
Load Protection |
On/off muting, DC-fault power supply protection
|
||
Indicators |
PARALLEL INPUTS: Red LED
BRIDGED: Yellow LED PWR-ON: Green LED |
CLIP/PROT: Red LED (1 per channel)
LEVEL-10 dB: Yellow LED (1 per channel) LEVEL-20 dB: Yellow LED (1 per channel) SIGNAL -35 dB: Green LED (1 per channel) |
|
Controls |
Controls Front: AC switch, four gain knobs
Rear: Two DIP switch gangs—channels 1 and 2; channels 3 and 4: clip limiter on/off, LF filter on/off, LF filter freq select 33 Hz or 75 Hz for non-V models; 50 Hz or 75 Hz for V models; inputs parallel or stereo; bridge mode |
||
Dimensions |
19" (48.3 cm) rack mounting, 3.5" (8.9 cm) tall (2 rack spaces),
14" (35.6 cm) deep (from front mounting rails) |
||
Weight |
21 lb (9.5 kg) net, 27 lb (12.3 kg) shipping
|
||
Power Requirements |
100, 120, 230 V AC, 50–60 Hz
|
CURRENT CONSUMPTION | CX204V | CX254 | CX404 | |
---|---|---|---|---|
Idle current (no or very low audio signal) (Multiply currents by 0.5 for 230 V units.) |
0.8 A | 0.7 A | 0.7 A | |
1/8 of full power (pink noise) (typical of program material at maximum unclipped power) |
8Ω + 8Ω 4Ω + 4Ω 2Ω + 2Ω 70 V + 70 V |
- - - 8.3 A |
5.8 A 9.2 A 14.3 A - |
8.1 A 12.4 A not rated - |
1/3 of full power (pink noise) (typical of program material with severe clipping) |
8Ω + 8Ω 4Ω + 4Ω 2Ω + 2Ω 70 V + 70 V |
- - - 12.7 A |
8.8 A 14.2 A 21.7 A - |
12.2 A 19.3 A not rated - |