PreSonus : CDL18s PreSonus

2,000-watt Subwoofer with 18" LF Driver and Dante Connectivity

หมายเลขสินค้า : CDL18s

video

ราคา 89,000^.00 บาท

ตรวจสอบก่อน! ว่ามีสินค้าหรือไม่
*กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144

เลือกจำนวน :

เลือกสี : สีดำ

ฟรี!

ประกัน 1 ปี
ฟรี!

ปรึกษาด้านเทคนิก

PreSonus CDL18s Dante-Enabled Active Subwoofer.

PreSonus CDL18s แอคทีฟซับวูฟเฟอร์ Dante-Enabled มอบประสิทธิภาพสูงและให้การควบคุมในแอปพลิเคชั่นเสริมเสียงสำหรับเวทีสด, โรงละคร, คลับและอื่น ๆ

Designed for articulated sub-bass frequency reproduction, the PreSonus CDL18s Dante-Enabled Active Subwoofer delivers a high-output and controlled performance in sound-reinforcement applications for live stage, theater, clubs, and more. The CDL18s utilizes a 2000W (peak) Class-D amplifier to power the 18" woofer with a 4" voice coil, delivering a frequency response of 42 to 150 Hz with a peak SPL of 135 dB.

The 15mm eucalyptus plywood enclosure is coated with a Chemline polyurea finish, a powder-coated steel grille, and offers XLR input and output with polarity invert. The driver and voice coil provide 7mm of driver travel before reaching over-excursion. The CDL18s easily ground stacks for simplified deployment and up to two subs may be flown with five CDL12 full-range tops for a complete line-array/point source sound system.

Onboard DSP presets help facilitate simplified array configurations, or connect the array via Ethernet to enable WorxControl software for Mac and Windows, which provides compression, limiting, delay, and an 8-band EQ. Speakers and subs may be grouped and managed separately or together with remote performance monitoring indicators for temperature and signal levels. Additionally, the locking Ethernet connection allow the amplifier to integrate into Dante network environment. The PreSonus CDL18s ships with a powerCON power cord.

Tight, coherent low-end
18" woofer with 4" voice coil
2000W peak Class-D amplifier
XLR input with XLR direct output
7mm driver travel before over-excursion
Chemline polyurea finished eucalyptus plywood enclosure with powder-coated steel grille
Integrated rigging hardware for easy deployment of fly-rigs and ground stacks
Two handles for ease in transport
Optional caster kit and CDL rigging kit available

Features :

Adds solid, gutsy bass to your full-range CDL12 system
18" driver unleashes loads of thunderous low end
2,000 watts of Class D power exhibit remarkable headroom, explosive SPLs, and incredible dynamics
Onboard array presets for easy deployment
Dive into advanced features with Worx Control software
Speaker-management tools include 8-band EQ, polarity invert, compression, limiting, 800ms of delay, and more
Built-in Dante connectivity gives you near-zero latency and synchronization
Boasts an impressive range of pole-mounted and suspended deployment options

PA Speaker

Configuration	Active Subwoofer
Total Power Capacity	2000 W Peak 1000 W Program 500 W RMS

Drivers

LF Driver	1 x 18" / 45.7 cm Woofer
LF Voice Coil	4" / 10.2 cm
Magnet	Ferrite

Performance

Frequency Range	20 Hz to 20 kHz 36 Hz to 144 Hz -10 dB
Frequency Response	42 Hz to 150 Hz -3 dB
Maximum SPL	135 dB
Max Input Level	+4 dBu
I/O Impedance	Input: 40 kOhms
THD	<0.05%
Protections	DC, Overcurrent, Overvoltage, Thermal, Undervoltage

Connectivity

Audio I/O	XLR Line Input XLR Output
Network I/O	1 x etherCON (Control)

Signal Processing

Crossover	90 Hz
EQ	Yes
Dynamic Processing	Compression, HF Limiter, Limiter
Alignment Delay	Yes
Phase Adjustment	Yes
Max Sample Rate/Resolution	48 kHz / 24-Bit

Power

AC Input Power	90 to 260 VAC, 50 / 60 Hz
AC Power Connector	1 x powerCON Input 1 x powerCON Output
Current Consumption	4.2 A (1/8 Power)

Physical

Mounting	1 x M20 (Top)
Handles	2 x Side
Cooling	Convection
Construction Material	Metal Grille, Plywood
Dimensions	23.2 x 20.8 x 24.0" / 589.3 x 528.3 x 609.6 mm
Weight	105 lb / 47.6 kg