Numark : M4 Numark

Three-Channel Table Top Scratch Mixer with Two Phono/Line Switchable (RCA), Four Line (RCA), Mic (1/4
หมายเลขสินค้า : M4

ราคา 5,990.00 บาท

*ราคาไม่รวมภาษีมูลค่าเพิ่ม 7%


  • สินค้าหมดชั่วคราว
  • *กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144

เลือกจำนวน :

เลือกสี : สีดำ

  • สีดำ


แชร์ไปยัง :

Three-Channel Table Top Scratch Mixer

M4 is a three-channel tabletop mixer designed for any DJ who needs maximum flexibility. It features a replaceable crossfader with reverse and slope controls, a 1/4” microphone input with EQ, and plenty of routing for phono and line level devices.

Where M4 really shines is its impressive input section. Two switchable phono/line inputs plus four more dedicated line inputs give you a total of SIX inputs! Add Master and Record outputs, and steep three-band EQ/rotary kills on each channel, and you’ve a powerhouse package that’s ready to handle whatever the gig throws at you.

M4 has the inputs, controls, and features to turn what would be a problem for the average mixer into a simple plug-in. Don’t get stuck without enough inputs at your next gig. Upgrade to M4

Features

  • Three-channel tabletop mixer
  • Inputs: two phono/line switchable (RCA), four line (RCA), mic (1/4")
  • Outputs: Master (RCA), Record (RCA), headphone (1/4" stereo)
  • Steep three-band EQ/rotary kills on each channel
  • Six-segment LED display for monitoring signal strength

Inputs:

Line: 10K ohm input impedance; 80mV RMS sensitivity for 0dB output

Mic: 600 ohm input impedance unbalanced; 1.5mV RMS sensitivity for 0dB output; 400mV RMS max input

Phono: 47k ohm input impedance; 1.3mV RMS sensitivity @ 1kHz for 0dB output


Outputs:

Line: 7V RMS max

Headphone: 0.5W into 47ohm


Signal to Noise Ratio:

(maximum output JIS-A weighted)

Line: Better than 100dB

Mic: Better than 95dB

Phono: Better than 85dB


Frequency response:

Line: 20 – 20,000 Hz ±0.5dB

Mic: 20 – 15,000 Hz ±0.5dB

Phono: ±1dB; -3dB attenuation at 20 Hz to reduce rumble and feedback


Channel Equalizer:

Bass: +12 / -35dB at 20 Hz

Mid: +12 / -25dB at 1.3 kHz

Treble: +12 / -20dB at 15 kHz


Channel fader kill: Better than 90dB at 1 kHz

Crossfader kill: Better than 75dB

Crosstalk: Better than 80dB at 1 kHz

Distortion: Less than 0.05%