Focusrite : ISA One Focusrite

Classic single-channel microphone preamplifier with independent DI

หมายเลขสินค้า : ISA One

video

ราคา 35,900^.00 บาท

ตรวจสอบก่อน! ว่ามีสินค้าหรือไม่
*กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144

เลือกจำนวน :

เลือกสี : สีน้ำเงิน

Classic single-channel microphone preamplifier with independent DI

The Focusrite Heritage Sound - in a versatile, transportable package

Back in the mid-1980s, Sir George Martin commissioned console design legend Rupert Neve to build a series of new, ‘no compromise’ console modules for AIR studios. They were an enormous hit and formed the basis of the Focusrite Studio Console, widely regarded as the best-sounding analogue recording console of all time. Today, the descendants of those modules are used in leading studios around the world, and their sought-after Focusrite Heritage Sound lies behind thousands of hit records. Today’s ISA Range from Focusrite puts the classic sound of Focusrite into your own studio or live performance.

Featuring a rugged, portable all-metal enclosure, the ISA One combines the classic Focusrite microphone preamp with a flexible, independent DI channel and optional 192kHz precision A/D conversion.

Classic Focusrite transformer-based mic preamplifier

At the heart of the ISA range is the microphone preamplifier with its Lundahl input transformer – essentially the same circuit, based on the original ISA110, that has been used for 30 years in successive Focusrite designs. The input transformer imparts a special character to the sound that can’t be truly emulated in any other way: inseparable from the microphone itself, the transformer input stage is ideal for use with classic microphones. But this mic pre has a twist the original didn’t have, which makes it far more versatile: four carefully-selected impedances allow you to match microphone to input in different ways. Bring out the character of a classic mic or emphasise a special feature, or go for a totally transparent, modern sound – it’s up to you.

Independent direct input

Whether you’re an artist, engineer or producer, you’ll appreciate the versatility of the ISA One, with its front-panel DI input. The DI includes low/high impedance switching and an amplifier output, and its own feed to the optional A/D converter and separate rear-panel XLR output

Features

ISA series transformer-based preamplifier
Flexible independent DI channel
Switchable impedance
Headphone output with volume control
Dedicated insert point
Optional stereo 192kHz A-D converter
Lundahl LL1538 Input Transformer
Backlit VU meter with variable calibration

Analogue Channel Inputs

XLR Mic input
One XLR and one TRS line input
XLR Instrument input TRS Jack
External ADC input TRS Jack
TRS jack return

Analogue Channel Outputs

TRS jack send
XLR balanced line output
XLR DI output
TS jack DI through

Analogue Channel Additional I/O

TRS Jack cue mix left input
TRS Jack cue mix right input
1/4” TRS Jack headphones output

Mic Input Response

Gain range : 0dB to 60dB in 10dB steps + 20 dB of variable gain
Input Impedance : Switched Impedance setting Equivalent Input Impedance at 1kHz
- Low = 600 Ohms
- ISA110 = 1400 Ohms
- Med = 2400 Ohms
- High = 6800 Ohms
EIN (Equivalent Input Noise) : -126dB measured at 60dB of gain with 150 Ohm terminating impedance and 22Hz/22kHz band-pass filter
Noise : Noise at output with unity gain (0 dB) and 22 Hz-22 kHz band pass filter -97 dBu
Signal-to-Noise Ratio : 106 dB relative to max headroom (9dBu)
Total Harmonic Distortion : + Noise Measured at medium gain (30dB) with a 1kHz -20dBu input signal and with a 22Hz/22kHz band-pass filter < 0.0009%
Frequency Response :
- At minimum gain (0 dB) -0.5dB down at 10Hz and -3dB down at 125kHz
- At maximum gain (60dB) -3dB down at 16Hz and -3dB down 118kHz
CMRR (Common Mode Rejection Ratio) : 98dB (Channel 1, 1kHz, maximum gain with +24 dBu input)
Crosstalk Channel to Channel : With 10dB@1kHz input to chA, chB output =104dBrA. With 10dB@10kHz input to chA, chB output = 84dBrA

Line Input Response

Gain range : -20dB to +10dB in 10dB steps + 20 dB of variable gain
Input Impedance : 10 kΩ from 10 Hz to 200 kHz
Noise : Noise at main output with gain at unity (0 dB) measured with 50 Ω source impedance and a 22Hz - 22 kHz band pass filter
- -96 dBu
Signal-to-Noise Ratio : Measured with a 22 Hz-22 kHz band pass filter
- 120 dB relative to max headroom (24 dBu)
- 118dB relative to 0dBFS (+22dBu)
Total Harmonic Distortion : + Noise Measured with a 0 dBu input signal, and a 22 Hz-22 kHz band pass filter
- 0.0001%
Frequency Response : At unity gain (0 dB)
- -0.3dB down at 10Hz and -3dB down at 200kHz

Instrument Input Response

Gain range : 10dB to 40dB continuously variable
Input Impedance :
- High = greater than 1M
- Low =greater than 300k
Noise : Measured with 22 Hz-22 kHz band pass filter
- Minimum gain (+10 dB): -92 dBu
- Maximum gain (+40dB): -62dBu
THD : At minimum gain (+10)
Frequency Response :
- At minimum gain (+10 dB) -10dB input: 10Hz-100kHz +/- 0.6dB
- At maximum gain (+40 dB) -40dB input: -2.5dB down at 10Hz and 0dB at 100kHz

Meters

Moving Coil (MC) Meter : factory calibrated to 0VU = +4dBu with 1kHz sinewave. With the VU Cal button pressed the meter can be adjusted on the rear panel to allow 0VU to equal +10dBu to +26dBu with the centre detent being equal to +22dBu.
Peak LED Meters : Calibrated in the detent position for 0dBFS = +22dBu, calibration is adjustable on the rear panel to allow 0dBFS to equal +10dBu to +26dBu

Routing for MC and Peak1 meter is after the HPF, pre insert send or switched post insert return. Peak2 is always pre ADC channel 2, which can be fed by external input or Instrument input.

LED Levels : As follows, when peak calibration is set to center detent on the rear panel. (This is when using the internal ADC). 0 = +22dBu
- -2 = +20dBu
- -6 = +16dBu
- -12 = +10dBu
- -18 = +4dBu
- -42 = -20dBu
Frequency Response :
- At minimum gain (+10 dB) -10dB input: 10Hz-100kHz +/- 0.6dB
- At maximum gain (+40 dB) -40dB input: -2.5dB down at 10Hz and 0dB at 100kHz

High-Pass Filter

Roll-Off : 18 dB per octave (3 pole filter)
Frequency : Fixed 75Hz measured at the 3dB down point

Weight and Dimensions

W x D x H :
- 220mm (W) x 104mm (H) x 254 - 290mm (D - top to bottom)
- 8.66" (W) x 4.1" (H) x 10" - 11.4" (D - top to bottom)
Weight 3.9 kg 8.6 lbs

http://global.focusrite.com/sites/default/files/downloads/6985/isaoneuserguide-english0.pdf