JBL : CSM-32 JBL

JBL CSM-32 3 x 2 Stereo Public Address Mixer
หมายเลขสินค้า : CSM-32

ราคา 27,900.00 บาท

ราคาปกติ : 40,200.00 บาท

ประหยัดไป 12,300.00 บาท



เลือกจำนวน :

เลือกสี : สีดำ

  • สีดำ


แชร์ไปยัง :

JBL CSM-32 3 x 2 Stereo Public Address Mixer

 

The JBL CSM-32 3 x 2 Stereo Public Address Mixer is a digital commercial mixer for conferencing, retail, and hospitality applications. The mixer features three stereo music inputs with bass and treble equalizers and one line input for connecting the mixer to a building's alarm system. The mixer also features one microphone input with phantom power, gain, and a ducker that can lower the volume of the music when making announcements.

The unit features two stereo outputs with zone equalizers, active crossovers, and separate subwoofer outs. An additional music-only mono output is provided for telephone music-on-hold systems. Designed with a simple analog style control panel, a knob switches between audio from source 1, audio from source 2, and remote control of the mixer. The unit does not require a computer to operate. An included security plate can be installed over the front panel to prevent changes to the unit's controls once configured.

The mixer works with CSR remote controllers, allowing you to use a remote to select the source and adjust the volume of each zone. Additional output zones may be added to the system by connecting multiple CSM mixers together using a Cat5 cable plugged into the unit's RJ45 link ports. With the above features, the mixer provides flexible options for different commercial sound applications.

Features

  • 3 Stereo Inputs
  • 1 Mic Input
  • 1 Line Input for Priority Audio
  • 2 Stereo Output with Dedicated Subwoofer Output
  • 1 Mono Isolated Output for Music-On-Hold System
  • Quick and Simple Configuration via Front/Rear Panel Controls
  • Digital Processor with Analog-Style Control
  • Music EQ per Zone
  • Global Mic EQ
  • AutoWarmth™ and LevelGuard™
  • Optional CSR Controllers
  • Contact Closure Control
  • Link Bus for Input Sharing
  • Security Plate for Front Panel Lockout (included)

Line Inputs
Type 3 x stereo, unbalanced RCA connectors
Nominal Sensitivity -10 dBV
Input Impedance 20 kΩ
Maximum Input +12 dBu
Equalization Bass ±10 dB @ 80 Hz
Treble ±10 dB @ 8 kHz, 6 dB/octave shelf
Mic
Type 1 x balanced, 0.2" (5.08 mm) Euroblock connector
Input Impedance 2 kΩ
Noise EIN <117 dB, 150 Ω, DSP band-limited 120 to 8,0000 Hz, BW24
Maximum Input +20 dBu
Equalization Bass ±6 dB @ 250 Hz, Treble ±6 dB @ 2 kHz, 6 dB/octave shelf
CMRR >40 dB, typically >55 dB @ 1 kHz
Preamp Overall Gain +30 dB to +60 dB adjustable
Phantom Power +48 VDC , 10 mA
Output
Type 2 x stereo (Left, Right, Sub) balanced 1/8" (3.5 mm), Euroblock connector
Output Impedance 120 Ω balanced
Maximum Output Level +20 dBu
Crossover Frequencies
Left and Right in: 125 Hz high-pass (BW24)
Sub in: 125 Hz low-pass (BW24)
Left and Right out: 20 to 20,000 Hz
Sub out : 20 to 20,000 Hz (mono summed)
LED INDICATORS Source inputs: 
Signal present LED (turns on at -20 dBu)
Signal clip LED (turns on at +10 dBu)

Mic input: 
Signal present LED (turns on at -20 dBu)
Signal clip LED (turns on at +18 dBu)
System Performance
Frequency Response 20 to 20,000 Hz, ±0.1 dB
Dynamic Range 104 dB, A-weighted, 20 to 20,000 Hz
Converter Mic input implements dbx Type IV conversion system
Sample Rate 48 kHz
Crosstalk >75 dB
THD & Noise 0.005% typical at +4 dBu, 20 to 20,000 Hz, 0 db gain
Rear Panel Connections
Direct Inputs 1 x Balanced, 1/4" (5.08 mm) Euroblock connector
Input impedance: 10 kΩ
Maximum input: +20 dBu
Frequency response: 20 to 20,000 Hz
Mute 1 x 2-pin 1/4" (5.08 mm) Euroblock connector
Connecting the pins mutes all source inputs, does not mute mic input.
Paging 1 x 2-pin 1/4" (5.08 mm) Euroblock connector
Connecting zone pins to ground assigns page to that respective zone
Link Source: 1 x RJ45 port requires CAT3 cable or higher with maximum length 7.9' (2.4 m)
Main: 1 x RJ45 port requires CAT3 cable or higher with maximum length 7.9' (2.4 m)
USB 1 x USB Type B port for firmware updates
General
Power Consumption 10 W
Power Requirements 100 to 240 V thermal fuse in external transformer
Rack Mountable Yes with included brackets
Dimensions (H x W x D) 19.0 x 1.8 x 7.0" (48.3 x 4.6 x 17.8 cm)
Weight 5.3 lb (2.4 kg)
Packaging Info
Package Weight 7.4 lb