ราคา 23,900.00 บาท
ราคาปกติ : 33,500.00 บาท
ประหยัดไป 9,600.00 บาท
JBL CSM -21 2 x 1 Stereo Public Address Mixer
The JBL CSM-21 2 x 1 Stereo Public Address Mixer is a digital commercial mixer for conferencing, retail, and hospitality applications. The mixer features two stereo music inputs with bass and treble equalizers and one line input for connecting the mixer to a building's alarm system. It also features one microphone input with phantom power, gain control, and a ducker that can lower the volume of the music when making announcements.
The mixer also features one stereo output with a zone equalizer, an active crossover, and a separate subwoofer out. The unit does not require a computer to operate. Designed with a simple analog style control panel, you can switch between source 1, source 2, and remote control with the turn of a knob. An included security plate can be installed over the front panel to prevent changes to the unit's controls once configured.
The mixer works with optional CSM remote wall controllers, allowing you to remotely adjust the input source and volume level. Additional output zones may be added to the system by connecting multiple CSM mixers together using a Cat5 cable plugged into the unit's RJ-45 link ports. With the above features, the mixer provides flexible options for different sound applications such as in restaurants, retail stores, yoga studios, and other commercial establishments.
Features
Line Inputs | |
---|---|
Type | 2 x stereo, unbalanced RCA connectors |
Nominal Sensitivity | -10 dBV |
Input Impedance | 20 kΩ |
Maximum Input | +12 dBu |
Equalization |
Bass ±10 dB @ 80 Hz, Treble ±10 dB @ 8 kHz with 6 dB/octave shelf |
Mic | |
---|---|
Type | 1 x balanced, 0.2" (5.08 mm) Euroblock connector |
Input Impedance | 2 kΩ |
Noise | EIN <117 dB, 150 Ω, DSP band-limited 120 to 8,0000 Hz, BW24 |
Maximum Input | +20 dBu |
Equalization |
Bass ±6 dB @ 250 Hz Treble ±6 dB @ 2 kHz with 6 dB/octave shelf |
CMRR | >40 dB, typically >55 dB @ 1 kHz |
Preamp Overall Gain | +30 dB to +60 dB adjustable |
Phantom Power | +48 VDC at 10 mA |
Output | |
---|---|
Type | 1 x stereo (left, right, sub) balanced 1/8" (3.5 mm, Euroblock connector) |
Output Impedance | 120 Ω balanced |
Maximum Output Level | +20 dBu |
Crossover Frequencies |
Left and right in: 125 Hz high-pass (BW24) Sub in: 125 Hz low-pass (BW24) Left and right out: 20 to 20,000 Hz Sub out: 20 to 20,000 Hz (mono summed) |
LED Indicators |
Source inputs: Signal present LED (turns on at -20 dBu) Signal clip LED (turns on at +10 dBu) Mic input: Signal present LED (turns on at -20 dBu) Signal clip LED (turns on at +18 dBu) |
System Performance | |
---|---|
Frequency Response | 20 to 20,000 Hz, +/-0.1 dB |
Dynamic Range | 104 dB, A-weighted, 20 to 20,000 Hz |
Converter | Mic input implements dbx Type IV conversion system |
Sample Rate | 48 kHz |
Crosstalk | >75 dB |
THD & Noise | 0.005% typical at +4 dBu, 20 to 20,000 Hz, 0 db gain |
Rear Panel Connections | |
---|---|
Direct Inputs |
1 x Balanced, 1/4" (5.08 mm) Euroblock connector Input impedance: 10 kΩ Maximum input: +20 dBu Frequency response: 20 to 20,000 Hz |
Mute |
1 x 2-pin 1/4" (5.08 mm) Euroblock connector Connecting the pins mutes all source inputs, does not mute mic input. |
Paging |
1 x 2-pin 1/4" (5.08 mm) Euroblock connector Connecting the pins will assign a page to the output zone |
Link |
Source: 1 x RJ45 port requires CAT3 cable or higher with maximum length 7.9' (2.4 m) Main:1 x RJ45 port requires CAT3 cable or higher with maximum length 7.9' (2.4 m) |
USB | 1 x USB Type B port for firmware updates |
General | |
---|---|
Power Consumption | 10 W |
Power Requirements | 100 to 240 V thermal fuse in external transformer |
Rack Mountable | Yes with included brackets |
Dimensions (H x W x D) | 19.0 x 1.8 x 7.0" (48.3 x 4.6 x 17.8 cm) |
Weight | 5.3 lb (2.4 kg) |