15" Self-Powered Extended Low Frequency Subwoofer System
The PRX715XLF, extended low frequency subwoofer was designed and engineered to provide sub bass frequencies with accuracy and power. Used as a single sub in a sub/sat system or in multiples as part of a scalable, large format sound reinforcement system, the PRX715XLF performs with extreme efficiency and control.
Features
-
131 dB peak SPL
-
15" Differential Drive® low-frequency driver for low-distortionand higher SPL
-
Efficient Class-D amplifier technology
-
DSP Input limiter circuit, crossover, dynamic limiting, component optimization, selectable system EQ
-
Integrated stereo pass-thru, with selectable HP filter, and polarity reverse
-
2 x XLR-¼" combination inputs, with 2 x XLR loop-thru
-
M20 pole receptacle accepts JBLPOLE-GA and JBLPOLE-MA speaker poles.
-
Multiple handles with comfort rubber grips for easy transport
-
Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish.
-
Cloth backed, dent-resistant 16 gauge steel grilles
Applications
-
The PRX715XLF extended low frequency subwoofer was designed and engineered to provide sub bass frequencies with accuracy and power. Used as a single sub in a sub/sat system or in multiples as part of a scalable, large format sound reinforcement system, the PRX715XLF performs with exceptional efficiency and control. The subs are stackable and light-weight ensuring quick set-ups and tear-downs. And due to their rugged construction are perfect for AV rental inventories. With a pole receptacle (that accepts a SS4-BK or SS4-BK24) on the top panel and integrated stereo pass-thru this is the most powerful low-frequency complement to the PRX full-range systems. The addition of a polarity reverse option further enables system optimization.
-
The PRX715XLF is a high performance self-powered subwoofer system. The PRX715XLF is comprised of a powerful 2275H Differential Drive® dual voice-coil and magnetic gap, woofer driven by a 1500 Watt Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable cross-over functionality, polarity optimization, protection, dynamic limiting and discrete component optimization.
-
All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability.
-
The amplifier input panel offers stereo inputs with XLR or ¼ inch jack compatibility. A user selectable crossover ensures a smooth transition to full-range system connected to the stereo outputs. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.
|
Power Rating |
1500 W |
|
AC Power Input |
100V - 240V~ 50/60 Hz |
|
Frequency Range (-10 dB) |
37 Hz - 113 Hz |
|
Frequency Response (±3 dB) |
44 Hz – 91 Hz |
|
Internal Crossover Frequency |
100 Hz DSP controlled 48 dB filter slope |
|
Loop out Crossover Frequency |
120 Hz analog 24 dB filter slope |
|
Maximum SPL |
131 dB |
|
Signal indicators |
Limit: Yellow LED indicates peak output has been reached and dsp
limiter is acting
Signal: Green LED indicates signal present
Power/Standby: Blue indicates system has power and ready to pass audio,
Red indicates system has power but is in a power saving mode and will not
pass audio. |
|
Dynamic Control (Input) |
dbx Type IV™ limiter circuit |
|
Input Impedance |
20K Ohms (balanced) |
|
Polarity |
normal or reverse polarity |
|
LF Driver |
1 x JBL 2275H 15 in woofer |
|
Enclosure |
Rectangular, 18 mm & 25mm, plywood |
|
Transport |
2 x injection molded handles with backing cup |
|
Finish |
Obsidian DuraFlex™ finish |
|
Grille |
Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing. |
|
Input Connectors |
Two Balanced female XLR/ 1/4" combo connectors |
|
Output Connectors |
Two balanced male XLR connectors. |
|
Dimensions (H x W x D) |
547.1 mm x 445.0 mm x 580.0 mm
(21.54 in x 17.52 in x 22.48 in) |
|
Net Weight |
25.4 kg (56 lb.) |