12" Two-Way Surface Mount Loudspeaker with 8Ω
หมายเลขสินค้า : AD-S12
ราคา 36,550.00 บาท
ราคาปกติ : 43,000.00 บาท
ประหยัดไป 6,450.00 บาท
-
ตรวจสอบก่อน! ว่ามีสินค้าหรือไม่
-
*กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144
เลือกจำนวน :
เลือกสี : สีดำ
แชร์ไปยัง :
12" Two-Way Surface Mount Loudspeaker with 8Ω
The AD-S12 12" 2-Way AcousticDesign Surface Mount and Loudspeaker from QSC is designed to serve as a versatile, all-weather device. The speaker uses DMT (Directivity Matched Transition) technology to provide a uniform frequency response over the axisymmetric coverage area. The ABS polymer enclosures, sealed input panel covers, and powder coated aluminum grille allow for indoor and outdoor use.
The included X-Mount System is designed to offer simple installation. Articulation marks allow the loudspeaker to be pre-installed on the ground and knurled surfaces at the pivot planes work to prevent the speaker from drifting or sagging over time.
Features
- 12” weather treated woofer; 1.4” compression driver
- 75° Axisymmetric (conical) coverage
- Maximum peak SPL 126 dB
- DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area
- X-Mount™ system enables the loudspeaker to be easily installed and deployed at a variety of angles with no slippage over time
- Optional Yoke mount and M10 Kit-C for additional installation versatility
- Advanced voicing filter sets using QSC Intrinsic Correction™, available through either Q-Sys processing or CXD amplifier platforms
- Lightweight ABS enclosures offer long-term durability and lasting good looks
- Sealed input panel cover and powder coated aluminum grilles for added weather resistance
- Meets IEC60529 IP-54 for dust and splash resistance
- Available in black (RAL 9011) or white (RAL 9010)
| System Details | AD-S12 | AD-S112sw | ||
| Effective frequency range1 | 52 Hz to 20 kHz | 30 to 135 Hz | ||
| Rated noise power / voltage2 | 300 watts / 50 volts (rms) | 300 watts / 50 volts (rms) | ||
| Broad-band sensitivity3 | 95 dB SPL | 90 dB SPL | ||
| Coverage angle (-6 dB) | 75° | |||
| Directivity factor (Q) | 12 | |||
| Directivity Index | 11 dB | |||
| Maximum continuous SPL4 | 120 dB | 115 dB | ||
| Maximum peak SPL4 | 126 dB | 121 dB | ||
| Rated impedance | 8 ohms | 8 ohms | ||
| Recommended amplifier power (loudspeaker "program" power) | 600 watts | 600 watts | ||
| Transformer taps | n/a | |||
| n/a | ||||
| HF transducer | 1” exit / 1.4” voice coil compression driver | |||
| LF transducer | 12” weather resistant paper cone woofer, 3” / 76 mm voice coil |
12” weather resistant paper cone woofer, 2.5” / 64mm voice coil |
||
| Input connector type | Euroblock connector with parallel output terminals | Euroblock connector with parallel output | ||
| Enclosure material | Painted ABS polymer | Painted ABS polymer | ||
| Grille material | Powder coated aluminum | Powder coated aluminum | ||
| Yoke material | Powder coated galvanized steel (included) | |||
| Enclosure Details | ||||
| Ingress protection | IP-54 | IP-54 | ||
| Operating environment | Designed for indoor and outdoor use | Designed for indoor and outdoor use | ||
| Testing | The AD Series loudspeakers qualified for outdoor use using the following tests: | The AD Series loudspeakers qualified for outdoor use using the following tests: | ||
| Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. | Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. | |||
| Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days | Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days | |||
| High and low temperature: tested according to QSC internal standards between -20° and 50° C | High and low temperature: tested according to QSC internal standards between -20° and 50° C | |||
| Operating Temperature Range | -20 to 50° C / -4 to 122° F | -20 to 50° C / -4 to 122° F | ||
| Net weight | 35.2 lb / 16 kg | 29 lb / 13.2 kg | ||
| Product dimensions | 23.4” × 13.9” × 12.7” (594 × 354 × 323 mm) | 23.4” × 13.9” × 12.7” (594 × 354 × 323 mm) | ||
| Shipping weight | 46.3 lb / 21 kg | 43.1 lb / 19.6 kg | ||
| Shipping dimensions | 34.5” x 17.9” x 17.2” (765 x 455 x 437 mm) | 27.5” x 21.75” x 18.5” (698 x 552 x 470 mm) | ||
| Included accessories | X-Mount mounting system, Euroblock connector, Input panel cover |
YMS12 yoke mounting system, Euroblock connector, input panel cover |
||
| Optional accessories | YMS12 yoke mount, M10 Kit-C | |||
| 1 Free-field, -10 dB from on-axis sensitivity | 1 Free-field, -10 dB from on-axis sensitivity | |||
| 2 IEC60268-1 noise signal for 2 hours | 2 IEC60268-1 noise signal for 2 hours | |||
| 3 On-Axis, free-field sensitivity, 2.83V, 1 m | 3 On-Axis, free-field sensitivity, 2.83 V, 1 m | |||
| 4 Calculated from rated noise voltage and sensitivity | 4 Calculated from rated noise voltage and sensitivity | |||
| As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice. | ||||
เปิด จันทร์ - อาทิตย์
เวลา 9.30 - 18.30 น.
32 ซอยรามคำแหง 24 แยก 30 (หมู่บ้านศิขริน) แขวงหัวหมาก เขตบางกะปิ กรุงเทพมหานคร 10240
บริการให้คำปรึกษา
English Version : 082-623-6663