10" Two-Way Surface Mount Loudspeaker with 70/100V Transformer and 8Ω bypass
หมายเลขสินค้า : AD-S10T
ราคา 30,600.00 บาท
ราคาปกติ : 36,000.00 บาท
ประหยัดไป 5,400.00 บาท
-
ตรวจสอบก่อน! ว่ามีสินค้าหรือไม่
-
*กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144
เลือกจำนวน :
เลือกสี : สีดำ
แชร์ไปยัง :
10" Two-Way Surface Mount Loudspeaker with 70/100V Transformer and 8Ω bypass
The AD-S10T 10" 2-Way AcousticDesign Surface Mount and Loudspeaker from QSC is designed to serve as a versatile, all-weather device. The speaker uses DMT (Directivity Matched Transition) technology to provide a uniform frequency response over the axisymmetric coverage area. The ABS polymer enclosures, sealed input panel covers, and powder coated aluminum grille allow for indoor and outdoor use.
The included X-Mount System is designed to offer simple installation. Articulation marks allow the loudspeaker to be pre-installed on the ground and knurled surfaces at the pivot planes work to prevent the speaker from drifting or sagging over time.
Features
- 10” weather treated woofer; 1.4” compression driver
- 90° Axisymmetric (conical) coverage
- 100 watt low-saturation and low-loss 70/100V transformers with 8Ω bypass
- Maximum peak SPL 122 dB (8 ohm bypass)
- DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area
- X-Mount™ system enables the loudspeaker to be easily installed and deployed at a variety of angles with no slippage over time Optional Yoke mount and M10 Kit-C for additional installation versatility
- Advanced voicing filter sets using QSC Intrinsic Correction™, available through either Q-Sys processing or CXD amplifier platforms
- Lightweight ABS enclosures offer long-term durability and lasting good looks
- Sealed input panel cover and powder coated aluminum grilles for added weather resistance
- Meets IEC60529 IP-54 for dust and splash resistance
- Available in black (RAL 9011) or white (RAL 9010)
| System Details | AD-S6T | AD-S8T | AD-S10T |
| Effective frequency range1 | 60 Hz to 20 kHz | 55 Hz to 20 kHz | 50 Hz to 19 kHz |
| Rated noise power / voltage2 | 150 watts / 35 volts (rms) | 200 watts / 40 volts (rms) | 250 watts / 45 volts (rms) |
| Broadband sensitivity3 | 89 dB SPL | 90 dB SPL | 92 dB SPL |
| Coverage angle (-6 dB) | 105° | 105° | 90° |
| Directivity factor (Q) | 5 | 7 | 10 |
| Directivity Index | 7 dB | 9 dB | 10 dB |
| Maximum continuous SPL4 | 110 dB | 113 dB | 116 dB |
| Maximum peak SPL4 | 116 dB | 119 dB | 122 dB |
| Rated impedance | 8 ohms | 8 ohms | 8 ohms |
| Recommended amplifier power (loudspeaker "program" power) | 300 watts | 400 watts | 500 watts |
| Transformer taps | 70 V: 60, 30, 15, 7.5 W and 8Ω bypass | 70 V: 60, 30, 15, 7.5 W and 8Ω bypass | 70 V: 100, 50, 25, 12.5 W and 8Ω bypass |
| 100V: 60, 30, 15 W and 8Ω bypass | 100V: 60, 30, 15 W and 8Ω bypass | 100V: 100, 50, 25 W and 8Ω bypass | |
| HF transducer | 1” silk dome tweeter / 1” voice coil, horn loaded | 1” exit / 1.4” voice coil compression driver | 1” exit / 1.4” voice coil compression driver |
| LF transducer | 6” weather resistant paper cone woofer | 8” weather resistant paper cone woofer | 10” weather resistant paper cone woofer |
| 1.5” / 38 mm voice coil | 2” / 51 mm voice coil | 2.5” / 64 mm voice coil | |
| Input connector type | Euroblock connector with parallel output | Euroblock connector with parallel output terminals | Euroblock connector with parallel output terminals |
| Enclosure material | Painted ABS polymer | Painted ABS polymer | Painted ABS polymer |
| Grille material | Powder coated aluminum | Powder coated aluminum | Powder coated aluminum |
| X-Mount material | Powder coated aluminum | Powder coated aluminum | Powder coated aluminum |
| Enclosure Details | |||
| Ingress protection | IP-54 | IP-54 | IP-54 |
| Operating environment | Designed for indoor and outdoor use | Designed for indoor and outdoor use | Designed for indoor and outdoor use |
| Testing | The AD Series loudspeakers qualified for outdoor use using the following tests: | The AD Series loudspeakers qualified for outdoor use using the following tests: | The AD Series loudspeakers qualified for outdoor use using the following tests: |
| Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. | Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. | Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. | |
| Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days | Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days | Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days | |
| High and low temperature: tested to QSC internal standards between -20° and 50° C | High and low temperature: tested according to QSC internal standards between -20° and 50° C | High and low temperature: tested according to QSC internal standards between -20° and 50° C | |
| Operating Temperature Range | -20 to 50° C / -4 to 122° F | -20 to 50° C / -4 to 122° F | -20 to 50° C / -4 to 122° F |
| Net weight | 13.6 lb / 6.2 kg | 24.1 lb / 11 kg | 31 lb / 15 kg |
| Product dimensions | 14.4” × 8.5” × 8.5” (365 × 215 × 215 mm) | 17.3” × 10” × 9.9” (440 × 254 × 251 mm) | 20.3” × 12.5” × 11.7” (516 × 318 × 298 mm) |
| Shipping weight | 33.4 lb / 15.2 kg (pair packed) | 32.1 lb / 14.5 kg | 40.6 lb / 18.45 kg |
| Shipping dimensions | 20" × 12” × 23” (510 × 305 × 585 mm) (pair packed) | 24.3 × 13.8” × 13.8” (729 × 351 × 351 mm) | 31.7” × 16.1” × 16.1” (805 × 409 × 409 mm) |
| Included accessories |
X-Mount mounting system, Euroblock connector, input panel cover |
X-Mount mounting system, Euroblock connector, input panel cover | X-Mount mounting system, Euroblock connector, Input panel cover |
| Optional accessories | YMS8T yoke mount, M10 Kit-C | YMS10T yoke mount, M10 Kit-C | |
| 1 Free-field, -10 dB from on-axis sensitivity | 1 Free-field, -10 dB from on-axis sensitivity | 1 Free-field, -10 dB from on-axis sensitivity | |
| 2 IEC60268-1 noise signal for 2 hours | 2 IEC60268-1 noise signal for 2 hours | 2 IEC60268-1 noise signal for 2 hours | |
| 3 On-Axis, free-field sensitivity, 2.83V, 1 m | 3 On-Axis, free-field sensitivity, 2.83V, 1 m | 3 On-Axis, free-field sensitivity, 2.83V, 1 m | |
| 4 Calculated from rated noise voltage and sensitivity | 4 Calculated from rated noise voltage and sensitivity | 4 Calculated from rated noise voltage and sensitivity | |
| As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice. | |||
เปิด จันทร์ - อาทิตย์
เวลา 9.30 - 18.30 น.
32 ซอยรามคำแหง 24 แยก 30 (หมู่บ้านศิขริน) แขวงหัวหมาก เขตบางกะปิ กรุงเทพมหานคร 10240
บริการให้คำปรึกษา
English Version : 082-623-6663