ราคา 14,450.00 บาท
ราคาปกติ : 17,000.00 บาท
ประหยัดไป 2,550.00 บาท
6.5" Two-Way Surface Mount Loudspeaker with 70/100V Transformer and 8Ω bypass
The QSC AcousticDesign Series AD-S6T 6.5” Two-Way Surface Mount Loudspeaker features a weather-treated paper cone woofer on 1.5” voice coil and a 1” silk dome tweeter with 1” voice coil that offers clear sound with a frequency response range of 60 Hz to 20 kHz. This loudspeaker utilizes a 60W low-saturation 70/100V transformer with varying selectable taps, including an 8Ω bypass. The rotary selector is located on the back of the enclosure, protected by a weather grommet.
With DMT (Directivity Matched Transition), this loudspeaker matches the directivity patterns of the woofer and the high-frequency waveguide at the crossover point and offers 105° axisymmetric (conical) coverage. The result is a coherent transition between transducers and improved off-axis response. Featuring rugged ABS enclosures, sealed input panel covers, and powder-coated aluminum grilles, the AcousticDesign surface mounted speaker exceed IEC60529 IP-54 ratings for dust and splash resistance.
Features
System Details | AD-S6T | AD-S8T | AD-S10T |
Effective frequency range1 | 60 Hz to 20 kHz | 55 Hz to 20 kHz | 50 Hz to 19 kHz |
Rated noise power / voltage2 | 150 watts / 35 volts (rms) | 200 watts / 40 volts (rms) | 250 watts / 45 volts (rms) |
Broadband sensitivity3 | 89 dB SPL | 90 dB SPL | 92 dB SPL |
Coverage angle (-6 dB) | 105° | 105° | 90° |
Directivity factor (Q) | 5 | 7 | 10 |
Directivity Index | 7 dB | 9 dB | 10 dB |
Maximum continuous SPL4 | 110 dB | 113 dB | 116 dB |
Maximum peak SPL4 | 116 dB | 119 dB | 122 dB |
Rated impedance | 8 ohms | 8 ohms | 8 ohms |
Recommended amplifier power (loudspeaker "program" power) | 300 watts | 400 watts | 500 watts |
Transformer taps | 70 V: 60, 30, 15, 7.5 W and 8Ω bypass | 70 V: 60, 30, 15, 7.5 W and 8Ω bypass | 70 V: 100, 50, 25, 12.5 W and 8Ω bypass |
100V: 60, 30, 15 W and 8Ω bypass | 100V: 60, 30, 15 W and 8Ω bypass | 100V: 100, 50, 25 W and 8Ω bypass | |
HF transducer | 1” silk dome tweeter / 1” voice coil, horn loaded | 1” exit / 1.4” voice coil compression driver | 1” exit / 1.4” voice coil compression driver |
LF transducer | 6” weather resistant paper cone woofer | 8” weather resistant paper cone woofer | 10” weather resistant paper cone woofer |
1.5” / 38 mm voice coil | 2” / 51 mm voice coil | 2.5” / 64 mm voice coil | |
Input connector type | Euroblock connector with parallel output | Euroblock connector with parallel output terminals | Euroblock connector with parallel output terminals |
Enclosure material | Painted ABS polymer | Painted ABS polymer | Painted ABS polymer |
Grille material | Powder coated aluminum | Powder coated aluminum | Powder coated aluminum |
X-Mount material | Powder coated aluminum | Powder coated aluminum | Powder coated aluminum |
Enclosure Details | |||
Ingress protection | IP-54 | IP-54 | IP-54 |
Operating environment | Designed for indoor and outdoor use | Designed for indoor and outdoor use | Designed for indoor and outdoor use |
Testing | The AD Series loudspeakers qualified for outdoor use using the following tests: | The AD Series loudspeakers qualified for outdoor use using the following tests: | The AD Series loudspeakers qualified for outdoor use using the following tests: |
Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. | Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. | Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. | |
Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days | Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days | Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days | |
High and low temperature: tested to QSC internal standards between -20° and 50° C | High and low temperature: tested according to QSC internal standards between -20° and 50° C | High and low temperature: tested according to QSC internal standards between -20° and 50° C | |
Operating Temperature Range | -20 to 50° C / -4 to 122° F | -20 to 50° C / -4 to 122° F | -20 to 50° C / -4 to 122° F |
Net weight | 13.6 lb / 6.2 kg | 24.1 lb / 11 kg | 31 lb / 15 kg |
Product dimensions | 14.4” × 8.5” × 8.5” (365 × 215 × 215 mm) | 17.3” × 10” × 9.9” (440 × 254 × 251 mm) | 20.3” × 12.5” × 11.7” (516 × 318 × 298 mm) |
Shipping weight | 33.4 lb / 15.2 kg (pair packed) | 32.1 lb / 14.5 kg | 40.6 lb / 18.45 kg |
Shipping dimensions | 20" × 12” × 23” (510 × 305 × 585 mm) (pair packed) | 24.3 × 13.8” × 13.8” (729 × 351 × 351 mm) | 31.7” × 16.1” × 16.1” (805 × 409 × 409 mm) |
Included accessories |
X-Mount mounting system, Euroblock connector, input panel cover |
X-Mount mounting system, Euroblock connector, input panel cover | X-Mount mounting system, Euroblock connector, Input panel cover |
Optional accessories | YMS8T yoke mount, M10 Kit-C | YMS10T yoke mount, M10 Kit-C | |
1 Free-field, -10 dB from on-axis sensitivity | 1 Free-field, -10 dB from on-axis sensitivity | 1 Free-field, -10 dB from on-axis sensitivity | |
2 IEC60268-1 noise signal for 2 hours | 2 IEC60268-1 noise signal for 2 hours | 2 IEC60268-1 noise signal for 2 hours | |
3 On-Axis, free-field sensitivity, 2.83V, 1 m | 3 On-Axis, free-field sensitivity, 2.83V, 1 m | 3 On-Axis, free-field sensitivity, 2.83V, 1 m | |
4 Calculated from rated noise voltage and sensitivity | 4 Calculated from rated noise voltage and sensitivity | 4 Calculated from rated noise voltage and sensitivity | |
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice. |