QSC : GX7 QSC

Stereo Power Amplifier 725 Watts/ch at 8 ohms
หมายเลขสินค้า : GX7

ราคา 33,150.00 บาท

ราคาปกติ : 39,000.00 บาท

ประหยัดไป 5,850.00 บาท



เลือกจำนวน :

เลือกสี : สีดำ

  • สีดำ


แชร์ไปยัง :

The QSC GX7 Power Amplifier is designed to provide power, portability, and professional sound quality at an affordable price. The GX7 can operate in stereo or mono modes, and has a 2RU chassis for installation in any standard equipment rack.

The rear panel features balanced XLR and 1/4" phone inputs, as well as unbalanced RCA phono inputs for complete compatibility with professional and consumer audio gear. Output is via Speakon combo connectors, which can accept 2-or-4-pole Speakon plugs and 1/4" TS plugs. Standard binding post outputs are also provided for full compatibility with a variety of systems, as well as 4 and 8 ohm speakers.

The GX7 uses a 2-tier Class-H circuitry design to provide exceptional power without excess loss. The efficient design also keeps weight low without sacrificing power. Detented gain controls provide precise level settings, while QSC's GuardRail protection circuitry delivers full peak power while preventing detrimental overloads due to excessive clipping or overheating. A built-in 180Hz crossover splits low and mid frequency signal between the left and right channel. This is ideal for use with subwoofers and satellite speakers.

Features

2RU chassis for installation in any standard equipment rack
Operates in stereo or mono mode for terrific versatility
Balanced XLR and 1/4" phone inputs, as well as unbalanced RCA phono inputs allow you to connect a variety of professional and consumer audio gear
Speakon combo connectors can accept 2-or-4-pole Speakon plugs and 1/4" TS plugs. Standard binding post outputs are also provided for full compatibility with a variety of systems, as well as 4 and 8 ohm speakers
The 2-tier Class-H circuitry design provides exceptional power without excess loss. The efficient design also keeps weight low without sacrificing power
Detented gain controls provide precise level settings
GuardRail protection circuitry delivers full peak power while preventing detrimental overloads due to excessive clipping or overheating
LED indicators for power, signal, and clip
A built-in 180Hz crossover splits low and mid frequency signal between the left and right channel. This is ideal for use with subwoofers and satellite speakers

SPECIFICATIONS GX3 GX5 GX7
  Output power per channel
8 ohms / 1 kHz (both channels driven) 300 W 500 W 725 W
8 ohms / 1 kHz (single channel driven) 350 W 600 W 800 W
4 ohms / 1 kHz (both channels driven) 425 W 700 W 1000 W
4 ohms / 1 kHz (single channel driven) 500 W 850 W 1200 W
Distortion (1 dB below rated power, 1 kHz)  8 ohms: less than 0.02%
4 ohms: less than 0.05%
Signal to Noise (20 Hz - 20 kHz) 100 dB
Input Sensitivity 1.2 V rms
Voltage Gain 32.2 dB 34.4 dB 36.1 dB
Output Circuitry Class B 2-tier Class H 2-tier Class H
Power Requirements (1/8 power, pink noise at 4 ohms, 120V) 6.3 A 6 A 10.1 A
Frequency Response 20 Hz–20 kHz, +0, -1 dB
Dynamic Headroom (4 ohms) 2 dB
Input Impedance Greater than 20 kΩ (balanced)
Maximum Input Level +24 dBu (16 V rms)
Input Connectors (each channel) 3-pin XLR and 1/4" TRS, balanced, parallel
Phono, unbalanced
Output Connectors (each channel) Speakon®, 1/4", Binding posts
Amplifier and Load Protection Short circuit, open circuit, thermal, RF protection
Load protected against DC faults
Front Panel Controls and Indicators Gain controls, 21 detents
Red CLIP LEDs, proportional, 0.1% THD threshold
Green SIGNAL LEDs, threshold 35 dB below clipping
Blue POWER LED, AC on
Rear Panel Controls Full Range / Crossover switch
100 Hz, 3rd order LP (sub), 2nd order HP (top)
Dimensions Height: 3.5" (89 mm) 2RU
Width: 19" (483 mm)
Depth: 10.1" (257 mm)
Weight Net: 27 lb (12.1 kg)
Shipping: 31 lb (14.1 kg)
Net: 28 lb (12.6 kg)
Shipping: 32 lb (14.6 kg)
120V model:
Net: 15.5 lb (7 kg)
Shipping: 20.5 lb (9.3 kg) 
230V model:
Net: 16.5 lb (7.5 kg)
Shipping: 21.5 lb (9.75 kg)
Agency Approvals UL, CE, RoHS/WEEE Compliant

AC Current and Heating, 120 VAC
(multiply current by 0.5 for 230 VAC) 
GX3 GX5 GX7
Operating Condition AC amps BTU/hour AC amps BTU/hour AC amps BTU/hour
Idle 0.2 44 0.3 60 0.6 82
8 + 8 ohms, 1/8 power 1 4.1 904 3.3 734 6.7 1169
8 + 8 ohms, 1/3 power 2 6.1 1160 8.5 1456 13.3 1807
8 + 8 ohms, full power 3 9.75 1109 16.2 1891 26.5 2167
4 + 4 ohms, 1/8 power 1 6.3 1515 5.8 1160 10.1 1963
4 + 4 ohms, 1/3 power 2 9.4 2105 11.2 2162 18.5 2612
4 + 4 ohms, full power 3 15.0 2297 24.5 3754 40 4478
  1 1/8 power represents typical maximum operating conditions
2 1/3 power represents overdriven program levels
3 Full power is breaker limited to short periods
For 230 V, multiply AC current by 0.5
For 100 V, multiply AC current by 1.25