QSC : GX3 QSC

Stereo Power Amplifier 300 Watts/ch at 8 ohms
หมายเลขสินค้า : GX3

ราคา 20,400.00 บาท

ราคาปกติ : 24,000.00 บาท

ประหยัดไป 3,600.00 บาท

*ราคาไม่รวมภาษีมูลค่าเพิ่ม 7%



เลือกจำนวน :

เลือกสี : สีดำ

  • สีดำ


แชร์ไปยัง :

The QSC GSX GX3 Power Amplifier is designed to provide power, portability and professional sound quality at an affordable price. The GX3 features 300 watts of power at 8 ohms (both channels driven) in a design that's easy to install and delivers flexible features. The rear panel features balanced XLR and 1/4" phone inputs, as well as unbalanced RCA phono inputs for complete compatibility with professional and consumer audio gear.

The outputs feature speaker binding posts and Speakon® connections. Detented gain controls provide precise level settings. QSC's GuardRail protection delivers full peak power while preventing detrimental overloads due to excessive clipping or overheating. In addition, a built-in 180Hz crossover splits low and mid frequency signal between the left and right channel. This is ideal for driving sub-woofers. The GX3 is a feature packed, lightweight amplifier that's suitable for mid-size venue installation, musicians, mobile DJs, etc.

 

Features

Power levels matched to the most popular speakers
Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems
Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source
Outputs: Speakon combo accepts, 1/4" (TS) plugs or Speakon 2-pole and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems.
Minimum depth chassis (10.1" / 257 mm) fits in compact, inexpensive effects racks
Lightweight - less than 30 lbs.
Detented gain controls for precise setting and matching of sensitivity
GuardRail automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
Front panel LEDs monitor power, signal and clipping
Subwoofer/Satellite crossover built-in
Power at 4 ohms/1kHz (both channels driven): 425W
Distortion (typical): 20Hz-20kHz, 1dB below rated power
Dynamic headroom (4 ohms): 2dB
Input impedance (ohms): reater than 20k (balanced)
Maximum input level: +24 dB (16 Vrms)
Input connectors (each channel): 3-pin XLR and 1/4" TRS, balanced, parallel Phono, unbalanced
Output connectors (each channel) Speakon, 1/4", binding posts
Amplifier and load protection: Short circuit; open circuit; thermal; RF protection; load protected against DC faults
Front-panel controls and indicators: Gain controls, 21 detents; red clip LEDs, proportional, 0.1% THD threshold; green signal LEDs, threshold -35dB; blue power LED, AC on
Rear panel controls: Full range/crossover switch 100Hz, 3rd order LP (sub), 2nd order HP (top)
Dimensions" Height: 3.5"/2RU; width: 19"; depth: 10.1"
Net weight: 27 lbs.

SPECIFICATIONS GX3 GX5 GX7
  Output power per channel
8 ohms / 1 kHz (both channels driven) 300 W 500 W 725 W
8 ohms / 1 kHz (single channel driven) 350 W 600 W 800 W
4 ohms / 1 kHz (both channels driven) 425 W 700 W 1000 W
4 ohms / 1 kHz (single channel driven) 500 W 850 W 1200 W
Distortion (1 dB below rated power, 1 kHz)  8 ohms: less than 0.02%
4 ohms: less than 0.05%
Signal to Noise (20 Hz - 20 kHz) 100 dB
Input Sensitivity 1.2 V rms
Voltage Gain 32.2 dB 34.4 dB 36.1 dB
Output Circuitry Class B 2-tier Class H 2-tier Class H
Power Requirements (1/8 power, pink noise at 4 ohms, 120V) 6.3 A 6 A 10.1 A
Frequency Response 20 Hz–20 kHz, +0, -1 dB
Dynamic Headroom (4 ohms) 2 dB
Input Impedance Greater than 20 kΩ (balanced)
Maximum Input Level +24 dBu (16 V rms)
Input Connectors (each channel) 3-pin XLR and 1/4" TRS, balanced, parallel
Phono, unbalanced
Output Connectors (each channel) Speakon®, 1/4", Binding posts
Amplifier and Load Protection Short circuit, open circuit, thermal, RF protection
Load protected against DC faults
Front Panel Controls and Indicators Gain controls, 21 detents
Red CLIP LEDs, proportional, 0.1% THD threshold
Green SIGNAL LEDs, threshold 35 dB below clipping
Blue POWER LED, AC on
Rear Panel Controls Full Range / Crossover switch
100 Hz, 3rd order LP (sub), 2nd order HP (top)
Dimensions Height: 3.5" (89 mm) 2RU
Width: 19" (483 mm)
Depth: 10.1" (257 mm)
Weight Net: 27 lb (12.1 kg)
Shipping: 31 lb (14.1 kg)
Net: 28 lb (12.6 kg)
Shipping: 32 lb (14.6 kg)
120V model:
Net: 15.5 lb (7 kg)
Shipping: 20.5 lb (9.3 kg) 
230V model:
Net: 16.5 lb (7.5 kg)
Shipping: 21.5 lb (9.75 kg)
Agency Approvals UL, CE, RoHS/WEEE Compliant

AC Current and Heating, 120 VAC
(multiply current by 0.5 for 230 VAC) 
GX3 GX5 GX7
Operating Condition AC amps BTU/hour AC amps BTU/hour AC amps BTU/hour
Idle 0.2 44 0.3 60 0.6 82
8 + 8 ohms, 1/8 power 1 4.1 904 3.3 734 6.7 1169
8 + 8 ohms, 1/3 power 2 6.1 1160 8.5 1456 13.3 1807
8 + 8 ohms, full power 3 9.75 1109 16.2 1891 26.5 2167
4 + 4 ohms, 1/8 power 1 6.3 1515 5.8 1160 10.1 1963
4 + 4 ohms, 1/3 power 2 9.4 2105 11.2 2162 18.5 2612
4 + 4 ohms, full power 3 15.0 2297 24.5 3754 40 4478
  1 1/8 power represents typical maximum operating conditions
2 1/3 power represents overdriven program levels
3 Full power is breaker limited to short periods
For 230 V, multiply AC current by 0.5
For 100 V, multiply AC current by 1.25