PreSonus : Sceptre S8 (Pair/ต่อคู่) PreSonus

180W 8" Active Monitor Speaker with Coaxial Speaker Alignment and 32-bit/96kHz Dual-core DSP Processor (Pair)
หมายเลขสินค้า : Sceptre S8

ราคา 37,900.00 บาท

ราคาปกติ : 49,900.00 บาท

ประหยัดไป 12,000.00 บาท



เลือกจำนวน :

เลือกสี : สีดำ

  • สีดำ

  • ฟรี!

    ประกัน 1 ปี

  • ฟรี!

    ปรึกษาด้านเทคนิก


แชร์ไปยัง :

180W 8" Active Monitor Speaker with Coaxial Speaker Alignment and 32-bit/96kHz Dual-core DSP Processor (Pair)

 

ลำโพง Studio Monitors แบบ Active ขนาดดอกลำโพง 8 นิ้ว กำลังขับ 180 วัตต์ 2 ทาง แอมป์คลาส D มาพร้อม 32-bit/96kHz Dual-core DSP Processor มีความเที่ยงตรงสูง และสามารถให้คุณทำงานมิกซ์เสียงได้อย่างสะดวกสบาย  มีย่านตอบสนองความถี่ตั้งแต่ 46Hz-20kHz (-3 dB), 38Hz-23kHz (-10 dB) ค่า SPL สูงสุด 116 dB เหมาะสำหรับห้องบันทึกเสียงระดับมืออาชีพ

 

Overview

The PreSonus Sceptre S8 is the company's next-gen 2-way studio monitor. Bi-amplified with 180 watts of Class D power, the Sceptre S8 employs a cutting-edge coaxial design and acoustic-adjustment controls facilitated by a 32-bit, 96kHz, dual-core processor and advanced Temporal Equalization technology. The result of all this high-tech engineering? Wide panoramic soundstaging, astonishing detail, and stunning dynamics. If you want to make great-sounding music, you've got to be able to hear what you're doing. With the PreSonus Sceptre S8, you can.

 

Hear the difference.

​​​The first time you hear Sceptre-series CoActual™ 2-way studio monitors, you’ll discover fine nuances of your music that can’t be reproduced by conventional designs. The Sceptre’s panoramic soundstage, fine detail, and stunning dynamics will astonish you.

 

The coaxial conundrum.

​​Coaxial designs offer the advantages of a single point source for a consistent acoustic center and a symmetrical dispersion pattern. But designing coaxial systems without acoustic anomalies has been extremely expensive—until now.

 

The magic of TQ.

Each Sceptre monitor contains a DSP chip that enables the use of Fulcrum Acoustic’s TQ algorithms. The result is speakers that deliver the full benefits of coaxial design.

 

Monitors you can customize.

Sceptres provide extensive user-adjustable contour features that let you optimize the monitors for any mixing space.

 

Big woof or huge woof.

The Sceptre series includes two models with the same high/mid coaxial section. The S6 delivers far better bass response than you’d expect for its size. The S8’s bass response is downright stunning.


Features

CoActual technology

  • Combines DSP time-correction and point-source design for symmetrical soundstage and micro-definition imaging
  • Unique coaxial transducer integrates 8-inch midrange driver and 1-inch (25 mm), horn-loaded HF transducer with Coaxial Speaker Coherence Alignment
  • Powerful DSP provides critical Temporal Equalization™ with multiple FIR filters

Acoustic-tuning controls

  • HF Driver Adjust (0 dB, +1 dB, -1.5 dB, -4 dB)
  • Acoustic Space settings (0 dB, -1.5 dB, -3 dB, -6 dB)
  • High-pass filter (Off, 60 Hz, 80 Hz, and 100 Hz, -24 dB/octave slope)
  • Sensitivity (+4 dBu to -10 dBV)

Power and safety

  • 180W RMS, Class D biamplification with internal heat sink
  • 102 dB maximum continuous SPL
  • RF shielding, current-output limiting, and over-temperature protection
  • Amplifier “soft start” feature eliminates popping on power-up
  • Internal power supply with IEC connector
  • Power switch with on/off LED

Inputs and outputs

  • Balanced XLR and ¼-inch TRS line-level inputs with A-taper level control

Powered Yes
Power Configuration Bi-amped (Coaxial Configuration with LF)
LF Driver Size 8"
LF Driver Type Cone
LF Driver Material Glass-reinforced Paper
HF Driver Size 1"
HF Driver Type Horn-loaded
LF Driver Power Amp 90W
HF Driver Power Amp 90W
Total Power 180W
Frequency Range 46Hz-20kHz (-3 dB), 38Hz-23kHz (-10 dB)
Crossover Frequency 2.4kHz
Maximum Peak SPL 116 dB
Enclosure Type Ported (Front)
Input Types 1 x XLR, 1 x TRS
Height 15.75"
Width 11.4"
Depth 13.3"
Weight 24.25 lbs.