Audio-Technica : ES973 Audio-Technica

Hypercardioid Condenser Handheld Microphone
หมายเลขสินค้า : ES973

ราคา 20,000.00 บาท



เลือกจำนวน :

เลือกสี : สีดำ

  • สีดำ


แชร์ไปยัง :

Hypercardioid Condenser Handheld Microphone

 

The new Engineered Sound®. Contractor-exclusive innovations for every acoustical challenge. And safe haven from RFI.

 

The ES973 is a high-quality hypercardioid condenser designed for use as a handheld, stand or lectern vocal microphone. The microphone’s rugged housing contains all electronics; it is equipped with an 80 Hz low-cut UniSteep® filter and a switchable 10 dB pad. The microphone offers unsurpassed immunity from radio frequency interference thanks to Audio-Technica’s UniGuard® innovations. Optional interchangeable elements are available for coverage from 100° to 360°.

Features

  • Designed for quality sound reinforcement with smooth, accurate audio reproduction in handheld and fixed-mount applications
  • Uniform hypercardioid polar pattern with 100º acceptance angle
  • Available interchangeable elements permit angle of acceptance from 100º to 360º
  • High sensitivity and high SPL capability
  • Rugged design and construction for reliable performance
  • Requires 11V to 52V DC phantom power
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Integral 80 Hz UniSteep® filter and 10 dB pad
  • RoHS compliant—free from all substances specified in the EU directive on hazardous substances

ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Hypercardioid
FREQUENCY RESPONSE 70-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY -41 dB (8.9 mV) re 1V at 1 Pa
IMPEDANCE 200 ohms
MAXIMUM INPUT SOUND LEVEL 155 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 131 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 70 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 3 mA typical
SWITCHES Flat, roll-off; -10 dB pad
WEIGHT 160 g (5.6 oz)
DIMENSIONS 156.7 mm (6.17") long, 
37.7 mm (1.48") head diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
OPTIONAL INTERCHANGEABLE ELEMENTS UE-O omnidirectional (360°) 
UE-C cardioid (120°) 
ACCESSORIES FURNISHED AT8405a stand clamp for 5/8”-27 threaded stands; AT8122 foam windscreen; protective pouch
AUDIO-TECHNICA CASE STYLE S2