8-channel Class A Remote-control Dante Mic Preamp with Class A Mic Preamps, Custom Rupert Neve Transformers, Full Dante Integration, and Redundant Power Supplies.
ปรีแอมป์ไมโครโฟนแบบ 8 ชาแนล Rupert Neve Designs RMP-D8, 8-channel Class A Remote-control Dante Mic Preamp with Class A Mic Preamps, Custom Rupert Neve Transformers, Full Dante Integration, and Redundant Power Supplies
The Rupert Neve Designs RMP-D8 is an 8-channel Dante microphone preamplifier designed to deliver classic Neve tone, high-resolution A/D conversion, and reliable Dante network integration for recording and mixing engineers in broadcast, houses of worship, and live stage applications.
The eight Class-A mic preamps, which offer up to 60 dB of gain in 1 dB increments, are paired with custom Rupert Neve Designs transformers. Mic or line inputs can be utilized via the eight XLR-1/4″ combo jacks. Mastering-grade converters operate at up to 24-bit/192 kHz resolution and feed digital signal simultaneously to dual Dante network ports and four 2-channel AES XLR outputs.
Each channel features selectable 48 VDC phantom power, polarity, a -10 dB pad, and an 80 Hz high-pass filter. RMP-D8 parameters can be viewed and adjusted locally via the large OLED display and front-panel controls, or remotely over the network. Built with touring in mind, the RMP-D8 boasts a reinforced steel chassis, redundant international power supplies, and latching IEC power cables.
Features:
-
8-channel Dante remote-control microphone preamp
-
8 mic/line inputs with 48V phantom power, polarity reverse, input pad, and highpass filter
-
1dB-stepped, remotely controllable Class A mic preamplifiers with 60dB of gain
-
Custom Rupert Neve Designs transformers for the larger-than-life sound of Rupert’s classic module designs
-
Mastering-grade 24-bit/792kHz converters with precision-controlled internal clocking and enhanced jitter reduction
-
Robust redundant power supplies capable of worldwide operation
-
Dante integration with redundant network ports for maximum reliability
-
Gain-compensated secondary output option with ±72dB range
-
4 dual-channel AES outputs on XLR connectors
-
Large OLEO display with full local control; accurate, easy-to-read meters
-
Complete integration with Dante Virtual Soundcard and Dante Via for direct computer input
-
Rugged, reinforced-steel chassis for enhanced RF shielding and use in challenging tour environments
Specifications
NOISE
150 Ohm Balanced Source, AES Output, 22 Hz to 22 kHz, un-weighted, +60 dB Gain.
-91 dBFS
UNITY GAIN
-110 dBFS
FREQUENCY RESPONSE
0 dBu, Unity Gain, 96 kHz
30 Hz to 45 kHz +/- 0.2 dB
10 Hz -3 dB
INPUT IMPEDANCE
5.5K Ohm
GAIN
0 to 60 dB in 1 dB steps
HIGH PASS FILTER
-3 dB @ 80 Hz, 12 dB/Octave Slope
PAD
-10 dB
SIGNAL TO NOISE RATIO
84.4 dB
DYNAMIC RANGE
110 dB
MAXIMUM INPUT LEVEL
+25.5 dBu
SHIPPING WEIGHT
17.6 lbs. (8 kg)
SHIPPING DIMENSIONS
22” (W) x 18” (D) x 9” (H) 55.9 cm (W) x 45.7 cm (D) x 22.9 cm (H)
POWER CORD TYPE
IEC Standard 3 Pin 18AWG Latching Type