Audio-Technica : PRO42 Audio-Technica

Miniature Cardioid Condenser Boundary Microphone with 25´ (7.6 m) cable
หมายเลขสินค้า : PRO42

ราคา 5,000.00 บาท

ราคาปกติ : 5,100.00 บาท

ประหยัดไป 100.00 บาท



เลือกจำนวน :

เลือกสี : สีดำ

  • สีดำ

  • ฟรี!

    ประกัน 1 ปี

  • ฟรี!

    ปรึกษาด้านเทคนิก


แชร์ไปยัง :

Miniature Cardioid Condenser Boundary Microphone with 25' (7.6 m) cable

 

The PRO 42’s low-profile design assures inconspicuous appearance for surface-mount use in boardroom, school, government, house of worship and other installed applications. Designed for sound reinforcement, broadcasting and recording applications, the PRO 42 brings crisp, intelligible audio reproduction to the podium, stage, conference table and beyond. With a wide-range condenser element and low-mass diaphragm for superior performance, the microphone is equipped with self-contained electronics, eliminating the need for external power modules.

Features

  • Very low-profile design for minimum visibility
  • Wide-range condenser element with low-mass diaphragm for superior performance
  • Uniform polar pattern for maximum rejection of unwanted sounds
  • Rugged design and construction
  • 25' (7.6 m) cable permanently attached between microphone and XLRM-type connector

ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Half-cardioid (cardioid in hemisphere above mounting surface)
FREQUENCY RESPONSE 70-14,000 Hz
OPEN CIRCUIT SENSITIVITY -38 dB (12.5 mV) re 1V at 1 Pa
IMPEDANCE 100 ohms
MAXIMUM INPUT SOUND LEVEL 134 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 105 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 65 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 9-52V DC, 2 mA typical
WEIGHT 1.2 oz (35 g)
DIMENSIONS 1.44" (36.6 mm) maximum width, 
2.14" (54.3 mm) maximum length, 
0.61" (15.5 mm) height
OUTPUT CONNECTOR 3-pin XLRM-type on cable
CABLE 25' (7.6 m) long, permanently attached