Lab Gruppen : PD3000 Lab Gruppen

3000W Two-Channel Amplifier with Precise Power Management.
หมายเลขสินค้า : PD3000

ราคา 28,000.00 บาท

*ราคาไม่รวมภาษีมูลค่าเพิ่ม 7%



เลือกจำนวน :

เลือกสี : Black

  • Black

  • ฟรี!

    ประกัน 1 ปี

  • ฟรี!

    ปรึกษาด้านเทคนิก


แชร์ไปยัง :

The PD3000
         The PD3000 is a two-channel amplifier delivering 2 X 1500W of power for entry/mid-level live sound applications. PD Series amplifiers employ our unique IDEEA Class-D output stage that is ideally matched to the rated power output. To provide flexibility, each channel offers sufficient voltage swing and current capacity to drive loads in any impedance without any additional configuration. In order to have low thermal losses as well as a high voltage swing, the design is based on a permanently bridged output.
 
FEATURES
  • Simple Control Just plug it in, crank it up and play. The comprehensive circuit protection will protect your PD3000 and your speakers against short circuits, DC and thermal overload.
 
  • Inputs Balanced XLR and TRS input and linking connectors with optimized sensitivities. Easy set up with configuration of modes and X-over functionality.
 
  • Speaker Outputs PD3000 amplifier employ our unique IDEEA Class-D output stage that is ideally matched to the rated power output. To provide flexibility, each channel offers sufficient voltage swing and current capacity to drive loads in any impedance without any additional configuration. In order to have low thermal losses as well as a high voltage swing, the design is based on a permanently bridged output.
 
  • Rugged and Lightweight Rack Mount Chassis Appropriate and reliable power amplification is vital to any audio system. Inadequate or faulty power amplifiers could cause damage to loudspeakers, or in some cases to the power amplifiers themselves. To prevent damage or service interruptions, the PD3000 amplifier offer advanced features to protect both internal circuits and connected loads.
 

Specification
General
  • Number of amplifier channels : 2
  • Peak total output all channels driven : 3000 W
  • Peak output voltage per channel : 115 V
  • Peak output current per channel : 32 A
  • Bridge mode : No
  • Output circuit type : Class-D
 
Amplifier Outputs
  • Max Output Power
  • All channels driven
  • 2 Ω per channel, stereo : 1000 W
  • 4 Ω per channel, stereo : 1500 W
  • 8 Ω per channel, stereo : 800 W
 
Audio Performance
  • THD+N 20 Hz - 20 kHz @ 1 W : < 0.1%
  • THD+N @ 1kHz, 1 dB below clip : < 0.1%
  • Signal-to-noise : >90 dB
  • Channel separation (Crosstalk) @ 1 kHz : >75 dB
  • Frequency response : 10 Hz to 20 kHz, +0.5/ -1 dB
  • Input impedance : 10 kΩ unbalanced, 20 kΩ balanced
  • Distortion,1/8 rated power : < 0.1%
 
System
Controls
  • Front : Power switch / Gain controls (channels A and B)
  • Rear : Stereo / mono,switchable Xover: LF / full range / HF, switchable
  • Crossover frequency : 100 Hz
 
Indicators
  • Power : RDY LEDs lit green
  • Limit, per channel : LIM LEDs lit red
  • Signal, per channel : -30 dB, -24 dB, -18 dB, -12 dB, -9 dB, -6 dB, -3 dB, LEDs lit green/orange
  • Thermal Warning, per channel : RDY LED blink orange
  • Thermal Warning 90%, PSU : Both RDY LEDs blink orange
  • Thermal fault, per channel : RDY LED blink red
  • Thermal fault 100%, PSU : Both RDY LEDs blink red
  • Fault, channel : RDY LED lit constantly red
  • Fault, device : Both RDY LEDs constantly lit red
 
Connectors
  • Inputs / link : 2 x XLR / 2 x 1/4" TRS
  • Outputs : Neutrik speakON (2 x NLT4)
  • Mains connector : Locking IEC appliance inlet, C14
 
Protection Features
Cooling : Two fans front-to-rear air flow, temperature controller speed
Amplifier protection : Thermal and DC protection, Rail sensing and peak current limiting.
Load protection : Controlled start and shutdown,behavior, DC-fault protection,Short-circuit protection
 
Power Supply
Voltage : Separate 230 V and 115 V versions available. Not selectable on the product.
USA / Canada / Japan : 100-120 V, 50/60 Hz
UK / Australia / Europé / Korea / China : 220-240 V, 50/60 Hz
Power consumption @ 4 ohms : 1050 W
 
Dimensions / Weight
Dimensions (H x W x D) : 93 x 483 x 326 mm (3.7 x 19 x 12.8")
Weight : 6.5 kg (14.3 lbs
Finish : Black painted aluminium chassis and grey front
Approvals : CE, cTUVus, PSE, RCM, CCC, FCC
 

ไม่พบข้อมูล