Two-way loudspeaker incorporating a 4-inch woofer, frequency range 52 Hz to 45 kHz.
ลำโพงแบบสองทางที่รวมวูฟเฟอร์แบบ Long-Throw ขนาด 4 นิ้ว ที่ทำจากเส้นใยแร่ Multi-Layer Mineral (MLM) แบบเดียวกันกับลำโพง A Series อื่นๆ รวมทั้งทวีตเตอร์ X-ART แบบคลาสสิก ความสามารถในการปรับแต่งตาม DSP แบบออนบอร์ดช่วยให้คุณหมุนเสียงที่สมบูรณ์แบบสำหรับพื้นที่ของคุณได้อย่างง่ายดาย ด้วยช่วงความถี่ 52 Hz ถึง 45 kHz A4V สามารถรองรับการใช้งานเสียงที่หลากหลาย ตั้งแต่การผลิตพอดแคสต์ไปจนถึงเครื่องสายแบบผสม และจะเข้ากันได้ดีกับการตั้งค่าแบบสมจริงและแบบ 3 มิติ
The A4V is a two-way speaker incorporating a 4-inch long-throw woofer made from the same Multi-Layer Mineral (MLM) fibers as other A Series speakers plus the classic X-ART tweeter. Onboard DSP-based tuning capabilities let you easily dial in the perfect sound for your space.
With a frequency range of 52 Hz to 45 kHz, the A4V can accommodate a broad spectrum of audio applications—from producing podcasts to mixing string quartets—and will fit well within immersive and 3D setups.
Features :
-
German Handmade Precision X-ART Tweeter with rotatable HPS waveguide
-
4" Woofer (Multi-Layer Mineral)
-
Cumulated Amp. Power Peak: 130 W
-
Frequency Response @ -6 dB: 52 Hz - 45 kHz
-
Maximum SPL per speaker at 1 m: 100 dB SPL
SPECS :
General Data
-
Display : Front panel multi-color LED
-
Cabinet Design : Dual front ported
-
Cabinet Material : Vinyl wrapped MDF and painted MDF front panel
-
Mounting options : Threaded inserts on the bottom of the cabinet (4 x M8)
-
Power consumption (max, idle, sleep) : 220 W, 10 W, 3.5 W
-
AC Input Voltage : 100 – 240 V, 50/60 Hz
-
Power Rating : 300 W max.
-
Operating Conditions: -10° C to +45° C (+14° F to +113° F); <75 % RH, non-condensing
-
Weight : 5.8 kg (12 lbs 13 oz)
-
Dimensions (Height x Width x Depth) : 268 mm x 158 mm x 220 mm (10 1/2″ x 6 1/4″ x 8 5/8“)
Audio Input Connectors
-
Analog : XLR, RCA
-
Input Impedance : 9 kOhm / 3.3 kOhm
-
Max. Input Level : +19 dBu
Amplification
Woofer
-
Amplifier Type : PWM
-
Peak (10% THD, limiter deactivated) : 110 W
-
RMS (1% THD, limiter deactivated) : 90 W
Tweeter
-
Amplifier Type : Class A/B
-
Peak (10% THD, limiter deactivated) : 20 W
-
RMS (1% THD, limiter deactivated) : 15 W
Control Options [via Network]
-
Networking Connector : RJ45
-
Connection Type : Ethernet
-
Communication Protocol : OCA using standard IP data
-
Control Software : A Control (Windows and MacOS available)
-
Room Adaption Options : Backplate, Extended, Sonarworks SoundID Reference integration
-
Advanced Room Adaptation : 6 x PEQ, Level, Delay
-
Third-party Calibration Compatibility : Import from Sonarworks SoundID Reference
Acoustics
-
Frequency Response @ -3 dB : 58 Hz – 41 kHz
-
Frequency Response @ -6 dB : 52 Hz – 45 kHz
-
Maximum SPL per speaker at 1 m : 100 dB SPL
-
Crossover Frequencies : 3.0 kHz
Drivers
Woofer
-
Basket Diameter : 4″
-
Voice Coil Diameter : 1″ (25 mm)
-
Cone Material : MLM
Tweeter
-
Type : X-ART
-
Diaphragm Area : 4 inch² (2420 mm²)
-
Equivalent Diaphragm Diameter : 2″ (56 mm)
-
Velocity Transform Ratio : 4 to 1
-
Diaphragm Weight : 0.17 g
-
Waveguide : HPS (rotatable)
-
Waveguide Dispersion : 120° horizontal, 70° vertical
Signal Processing
-
AD converter : 24-bit
-
Internal sample rate : 96 kHz
-
Delay range, resolution : 0 – 10 ms, 0.1 ms
-
Protection : Independent peak and thermo limiters for each driver, and amplifier thermo limiters
Control Options [via Backplate]
-
Input Sensitivity : 0 dBu = 100 dB SPL at 1 m @ 0 dB level setting
-
Level : -12 dB to +12 dB
-
Input Selection : Balanced, unbalanced
-
Voicings : Pure, UNR
Room Adaption
-
Bass : +2, 0, -2, -4 dB
-
Desk : 0, -2, -4 dB
-
Presence : +1, 0, -1 dB
-
Treble : +1.5, 0, -1.5 dB