Allen & heath : DLIVE-DM32 ALLEN&HEATH

dLive S Class DM32 MixRack 128x64 mix engine 32/16 sockets, 1x PSU, GigaACE, ME-1port,3x I/O Ports,

หมายเลขสินค้า : DLIVE-DM32

video

ราคา 488,640^.00 บาท

ราคาปกติ : 610,810.00 บาท

ประหยัดไป 122,170.00 บาท

ตรวจสอบก่อน! ว่ามีสินค้าหรือไม่
*กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144
การผ่อนชำระ ผ่อนได้สูงสุด 3-10 เดือน

เลือกจำนวน :

เลือกสี : สีดำ

ฟรี!

ประกัน 1 ปี
ฟรี!

ปรึกษาด้านเทคนิก

dLive S Class DM32 MixRack 128x64 mix engine 32/16 sockets, 1x PSU, GigaACE, ME-1port,3x I/O Ports,

มิกซ์แร็ค 128 แชลแนล 96 kHz each มี 32 mic/line inputs, มี 16 line outputs มาพร้อมระบบ gigaACE ในการคอนโทรล Surface Control เชื่อมต่อผ่านช่อง Ethernet 2 พอร์ท แค่มีแค่คอมพิวเตอร์หรือแล็ปท๊อปก็สามารถควบคุมได้เลย เหมาะสำหรับงาน Live sound

The MixRack is the heart of any dLive system. It houses the XCVI processing core complete with audio I/O, control and audio networking ports. It is typically connected to a dLive Surface, but can also be controlled at the same time as or even without a Surface using a laptop or iPad, Allen & Heath IP remotes or third party controllers via TCP/IP.

There are 3 sizes of dLive MixRack available. All feature the same mix engine and differ only in the number of analogue I/O. All models can work with the full 128 channels by adding DX expanders or patching digital sources.

XCVI Core

The power of dLive emanates from the XCVI Core – pioneered by the Allen & Heath R&D team using next generation FPGA technology, with 36 parallel virtual processing cores generating enough power for 160×64 channels of processing at 96kHz sampling rate. Six parallel mixing engines within the Core calculate over 10,000 cross points per sample, while the FPGA router has capacity for 3,000 x 3,000 audio paths. The massive power of XCVI (25 billion operations per second) allows dLive to deliver 128 full processing inputs and 16 stereo FX returns, a configurable 64 bus architecture, variable bit depth for ultimate precision and noise performance, a virtually infinite mix headroom thanks to a 96bit accumulator, and class leading latency at an ultra-low 0.7ms.

DEEP Processing

Our DEEP processing architecture embeds class-leading compressors and processing emulations directly within dLive’s input and mix channels. An array of bespoke algorithms including Graphic EQs, Compressors and a 64 channel Automatic Mic Mixer (AMM) can be inserted on the fly without burning FX slots and without the setup, latency and licence hassles associated with external plug-ins – they’re right there, where you need them, whenever you need them. The compressor models capture the audio nuances and non-linear ballistics of industry classics, ranging from a Slow-Opto model, various RMS detection and soft knee circuits, through to super-fast peak and RMS based compression/limiting devices.

RackExtra FX

The RackExtra FX portfolio combines the pristine quality and wide choice offered by boutique plug-ins with the convenience and low latency of onboard processing. It’s no secret that we have a passion bordering on obsession for crafting painstakingly faithful emulations of the most revered analogue outboard equipment. Drawing on the power of the XCVI Core, we have built hugely potent DSP kernels within the FPGA, allowing us to integrate our proven library of reverb, delay and modulator algorithms into dLive, with 16 FX slots available, each with a dedicated stereo return.

Automatic Mic Mixer (AMM)

AMM provides automatic level control of up to 64 microphones for spoken word applications such as conferences, panel shows, discussion forums and government / council meetings.

As well as reducing the risk of feedback, legibility is enhanced by minimising phase interference between channels, a common problem in multi-microphone spoken word applications.

Up to 4 zones can be enabled allowing automatic control of multiple rooms simultaneously from one interface.

Two modes of operation, NOM & D-Classic, are included:

D-Classic utilises dynamic gain sharing and is quick and easy to set-up.

NOM (Number of Open Microphones) builds on the logic based automatic mixing algorithm of our iDR install range offering additional parameters and maximum flexibility to the operator.

Built To Endure

Maybe it’s no coincidence that our lead mechanical designer on the dLive project used to be a tank commander. All dLive consoles have been designed to deliver the optimal balance between strength and weight, employing higher grade metal on the sides and folded steel at key points for added rigidity. Not only does every console, MixRack and expander have dual power supply slots for redundancy, but we’ve also employed the same rugged, hot-swappable PSU design across the range for maximum peace of mind and minimum inventory. Dual redundancy is also built into every audio connection throughout the system. We have also paid particular attention to console illumination, conducting rigorous trials to ensure that dLive excels in the sunny, outdoor settings where many digital consoles become almost unusable.

Features:

32 mic/line inputs, 16 line outputs
XCVI 160×64 FPGA core
96kHz sample rate
Variable bit-depth for ultimate precision and noise performance
Virtually infinite mix headroom thanks to 96bit accumulator
Class leading, ultra-low latency < 0.7ms
128 Input Channels with full processing
64 Mix Outputs with full processing
Configurable 64 bus architecture (group, FX, aux, matrix, mains)
LR, LCR and up to 5.1 mains mode
Multiple PFLs
16 RackExtra FX with dedicated stereo returns
24 DCAs
AMM (Automatic Mic Mixer) up to 64 channels across 1, 2 or 4 zones
Built-in signal generator and RTA
New preamp design for extra transparency
Unique Active PAD circuit for consistent performance with any source
Connection hub
Dual redundant GigaACE gigabit link to Surface
2x redundant DX links for I/O expansion
3x I/O Ports – 128 ch 96 kHz each
Dedicated ME-1 48kHz port
2x Network ports
Wordclock BNC I/O
Add up to 46 DX I/O expanders via DX Hub modules or DX Link cards
Dual redundant, hot swappable power supply
Flush front panel with ultra quiet fan
Reversible rack ears design

Type:Digital Stage Box Mixer
Compatibility:dLive Surface
Channels:128 total input channels (32 x 16 immediate I/O)
Inputs - Mic Preamps:32 x XLR (mic/line)
Phantom Power:32 channels
Data I/O:2 x EtherCon (GigaACE links), 4 x EtherCon (DX redundant), 2 x Ethernet RJ-45 (network), 1 x EtherCon (ME-1)
Busses/Groups:64 bus
Computer Connectivity:Ethernet
Word Clock:In/Out
I/O Expansion Slots:3 x slots (MADI, Dante, Waves, ACE, SoundGrid)
Headphones:1 x 1/4", 1 x 1/8"
EQ Bands:Parametric, Graphic
Effects:16 RackExtra FX library
Signal Processing:Dynamics
Software:dLive Editor
Rackmountable:Yes
Power Source:Dual redundant, hot swappable power supply
Height:12.8" (including foot risers)
Depth:12.3"
Width:19"
Weight:33 lbs.