Allen & Heath : DX164-W ALLEN&HEATH

DX Wall-mount/floor expander; 16 mic/line, 4 XLR out, 2 Ethercon ports (SQ, AVANTIS, dLive)

หมายเลขสินค้า : DX164-W

video

ราคา 93,280^.00 บาท

ราคาปกติ : 116,600.00 บาท

ประหยัดไป 23,320.00 บาท

ตรวจสอบก่อน! ว่ามีสินค้าหรือไม่
*กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 061-649-9144

เลือกจำนวน :

เลือกสี : สีดำ

ฟรี!

ประกัน 1 ปี
ฟรี!

ปรึกษาด้านเทคนิก

DX Wall-mount/floor expander; 16 mic/line, 4 XLR out, 2 Ethercon ports (SQ, AVANTIS, dLive)

สเต็จบ๊อก(ติดผนัง) สำหรับประมวลผลเสียงหรือเครื่องขยายเสียงสำหรับดิจิตอลมิกเซอร์ AHM-64 audio matrix, SQ, Avantis มีเอาท์พุต 16 XLR 4 balanced line outputs และ Locking Ethercon ports

The DX164-W is a wall mountable expander that adds remote I/O to a dLive, Avantis or SQ mixer, or to the AHM-64 audio matrix processor.

Each DX164-W features 16 mic preamps with independent Phantom Power LED indicators, plus 4 XLR line outs.

The Expander’s design allows for wall mount operation or, alternatively, installation in a stage “Dip Trap” making it perfect for fixed installations.

With dLive

Up to 6 DX164-W units can be connected to a standard dLive system – 4 via the MixRack and 2 via the Surface – allowing up to 96 remote inputs and 24 remote outputs in addition to those provided by the MixRack and Surface. Up to 46 units can be added to a dLive system via a DX Link card or DX Hub (808 analogue inputs, 224 analogue outputs).

The DX164-W connects via a single Cat5e cable (Ethernet based Layer 2) to the dLive Surface, MixRack, DX Hub or upstream DX164-W / DX168 via a secure etherCON port. A second locking etherCON port is provided for redundant connection to compatible hardware, or for daisy-chaining to a downstream DX164-W or DX168 for additional remote I/O.

With AHM-64

Two units can be daisy chained and connected directly to an AHM-64 SLink port. Up to 8 DX164-W units can be added to an AHM-64 system via a DX Hub and freely patched to the 64 input channels.

With Avantis

Two units can be daisy chained and connected directly to an Avantis SLink port. Up to 16 DX164-W units can be added to an Avantis system via DX Link card and/or DX Hubs.

With SQ

Two units can be daisy chained and connected directly to an SQ SLink port, with the optional SLink card for SQ enabling more connections. For a more distributed system, a DX Hub can handle up to 8 DX164-W or DX168 units in any combination, which can be freely patched to the SQ’s 48 input channels.

Features :

Designed for Wall Mount or Dip Trap installation
16 balanced Mic Preamps on XLR
Phantom Power LED per Input
4 balanced XLR Line Outs
Locking EtherCon ports
Daisy chain or redundant audio connection
Can fit in a standard NEMA box (custom brackets required)
Compatible with ACE Backstage 174SLBK stage pocket system
3 power supply options: 100-230V AC powered on IEC or screw terminal blocks, as well as 12V DC power
DC power can be used as redundant power supply
96kHz converters

Mic/Line XLR Inputs : Balanced XLR, +48V phantom power
Mic/Line Preamp : Fully recallable
Input Sensitivity : -60 to +15dBu
Analogue Gain : +5 to +60dB, 1dB steps
Pad : -20dB Active PAD
Maximum Input Level : +30dBu (PAD in)
Input Impedance : >4kΩ (Pad out), >10kΩ (Pad in)
Mic EIN : -127dB with 150Ω source
Analogue XLR Outputs : Balanced, Relay protected
Output Impedance : <75Ω
Nominal Output : +4dBu = 0dB meter reading
Maximum Output Level : +22dBu

Residual Output Noise :
-92dBu (muted, 20-20kHz)
-90dBu (muted, 20-40kHz)
Operating Temperature Range : 0°C to 35°C (32°F to 95°F)
Power
Mains Voltage Operating Range : 100-240V AC, 50/60Hz
Mains Power Consumption : 35W max
DC Input : 12V DC, 3A max