Two-way passive, full-range, low profile 4” ceiling speaker
ลำโพงติดเพดาน ขนาด 4 นิ้ว 2 ทาง 15 วัตต์ แบบ 8 โอห์ม หรือ 70/100 โวลต์ ตอบสนองความถี่อยู่ที่ระหว่าง 110Hz–18kHz ให้เสียงครอบคลุมที่สม่ำเสมอ และ เสียงที่คมชัด เหมาะสำหรับ โรงแรม ออฟฟิส ร้านอาหาร และ สำนักงานต่างๆอีกมากมาย
Up 4S is a discreet, two-way, passive 4” speaker delivering consistent coverage and full frequency sound to a wide range of cost conscious, commercial environments from hotels and concourses to retail outlets, bars and restaurants.
Up 4S features a 4” (105mm) low frequency driver paired with a 0.7” (20mm) silk dome tweeter. It is suitable for both high quality speech and music reproduction.
The wide 150° conical coverage of Up 4S makes it particularly suitable for low ceilings and reduces the number of speakers required for even coverage leading to a reduction in installation cost. A shallow steel back can allows installation in ceilings with minimal cavity depth. An integral fixing system is included to achieve a simple and clean installation. Up 4S has a steel back, perforated steel grille and finished in neutral white.
Each Up 4S can be run on a series of 70 or 100 Volt taps or at low impedance. Tap selection is via a rotary switch behind the removable grille.
SmartAmps or Zone will provide optimal performance and loudspeaker protection. When coupled with the Zone series, a ZonePad and the WebApp makes setting up a system and end user control simple and intuitive.
Features :
-
4” coaxial driver
-
Discreet size with shallow back can
-
Unobtrusive design
-
8 ohm or 70/100V line operation
-
Range of power taps
-
Wide conical coverage pattern
-
Integrated mounting hardware
-
TYPE : Two-way, full range, passive, ceiling speaker
-
FREQUENCY RESPONSE (with preset) : 110Hz – 18kHz ± 3dB -10dB @ 85Hz
-
DRIVERS : LF: 4” (105mm), Polypropylene injection moulded
-
HF: 1 (25mm) exit/0.7 (20mm) voice coil, Silk Dome
-
RATED POWER (AES) : 15W
-
NOMINAL IMPEDANCE : 8 Ohms
-
SENSITIVITY (1W/1m) : 86dB
-
MAXIMUM SPL : 98dB (cont), 101dB (peak)
-
CROSSOVER : 3.5kHz passive
-
RECOMMENDED HIGH-PASS FILTER : 24dB/octave @ 85Hz
-
TRANSFORMER TAPS @ 70V : 8,4,2,1,0.5W
-
TRANSFORMER TAPS @ 100V : 8,4,2,1W
-
DISPERSION (-6dB) : 150˚ conical
-
BACK CAN : Zinc-plated Steel
-
BAFFLE : ABS
-
PROTECTIVE GRILLE : Perforated steel
-
UL94-V0 UL94-5VB
-
CONNECTORS : Lockable with link through
-
FITTINGS : C-ring support backing plate
-
DIMENSIONS : (W) 202mm x (H) 128mm x (D) 202mm
-
(W) 7.95” x (H) 5.04” x (D) 7.95”
-
WEIGHT : 2.2kg (4.9lbs)