Wired Condenser Microphone Includes RPW192 mic head and VPH mic handle.
Shure KSM11 (RPW192+VPH) ชุดไมโครโฟนแบบคอนเดนเซอร์ที่จะประกอบด้วยหัวไมค์ RPW192 และที่จับไมค์ VPH เข้าด้วยกัน นิยามใหม่ของประสิทธิภาพเสียงโดยให้เสียงต่ำเต็ม เสียงกลางที่ชัดเจน และรายละเอียดระดับไฮเอนด์ที่คุ้มค่า โดยไม่จำเป็นต้องใช้ EQ การรับเสียงแบบคาร์ดิออยด์ที่ออกแบบมาโดยเฉพาะสำหรับการแสดงสด การบันทึกเหตุการณ์ และการสตรีมแบบพรีเมียม พร้อมความสามารถในการใช้กับอุปกรณ์พกพาแบบไร้สายของ Shure ที่เข้ากันได้ ให้คุณภาพเสียงที่เป็นธรรมชาติ เหมาะกับการใช้งานทุกรูปแบบ
รายละเอียด
-
แคปซูลคอนเดนเซอร์ไร้สายที่เป็นกรรมสิทธิ์ซึ่งใช้ไดอะแฟรมสีทอง 0.75 นิ้ว และอุปกรณ์อิเล็กทรอนิกส์ระดับพรีเมียม
-
สำหรับช่วงไดนามิกที่ยอดเยี่ยมและการตอบสนองที่รวดเร็ว
-
รูปแบบขั้วคาร์ดิออยด์ที่มีความสม่ำเสมอสูงช่วยลดความผิดเพี้ยนเพื่อความสมบูรณ์แบบ
-
ตอบสนองความถี่ต่ำที่สมบูรณ์ เสียงกลางที่โปร่งใสและรายละเอียดที่เป็นธรรมชาติ
-
การออกแบบที่คล่องตัวสำหรับขนาดแคปซูลโดยรวมที่เล็กลงและเบาลง
-
ระบบแยกอิสระขั้นสูงที่แทบไม่มีเสียงรบกวน
-
กระจังหน้าเหล็กชุบแข็งที่ทนทานพร้อมตัวกรองป๊อปอัพลดโพลซีฟ 3 ขั้นตอนเพื่อความสม่ำเสมอ
-
เสียงร้องที่เป็นธรรมชาติ
-
มีสีดำหรือสีนิกเกิลขัดเงาสำหรับใช้กับอุปกรณ์พกพาแบบไร้สายของ Shure ที่เข้ากันได้
The black VPH Long Microphone Handle from Shure is a wired microphone handle designed for interchangeable mic cartridges (sold separately), allowing you the opportunity to choose from over a dozen different Shure RPW cartridges to maximize sound based on your situation, environment, and venue. The handle is long enough to accommodate broadcast flags, and the XLR connector offers a secure connection to broadcast mixers and recorders (11-52 VDC phantom power is required).
Feature
-
Proprietary wireless condenser capsule utilizing a ¾” gold diaphragm and premium electronics for exceptional dynamic range and transient response.
-
Highly consistent, deep cardioid polar pattern reduces off-axis phase distortion for pristinely focused vocal reproduction to provide rich and full low frequency response, linear and transparent mid-range and natural high-end detail.
-
Streamlined design for an overall smaller and lighter capsule footprint.
-
Advanced suspended isolation system for virtually zero handling noise.
-
Dent-resistant hardened steel grille with 3-stage plosive reduction pop filtering for consistent, artifact-free vocals.
-
Available in black or brushed nickel finish for use with compatible Shure handheld wireless transmitters.
Specifications
Type : Electret Condenser
Polar Pattern : Cardioid
Freqeuncy Response : 50 to 20,000 Hz
Output Impedance : (1 kHz) 250 Ω with 5 VDC
Sensitivity at 1 kHz, open circuit voltage : –46.5 dBV/Pa
Maximum SPL with 5 VDC : 151 dB SPL
Signal-to-Noise Ratio : 71.5 dB
Dynamic Range with 5 VDC : 128.5 dB
Clipping Level with 5 VDC : 10 dBV
Self Noise | 22.5 dB SPL typical, equivalent SPL, A-weighted
Polarity : Positive pressure on diaphragm produces positive voltage into trasnmitter with respect to ground.
Power Requirements : 5 Volt Bias from Shure Transmitter
Weight : 5.23 oz (150 g)
Dimensions (Dia × Height) : 1.92 × 3.0 in. (48.7 × 76.3 mm)
Housing : Aluminum and steel grille
Performance
-
Impedance : 95 Ohms
-
Dynamic Range : 137.9 dB A-Weighted (1-Kilohm Load)
-
Equivalent Noise Level : 124.9 dB A-Weighted
Connectivity
-
Analog Output : 1x XLR 3-Pin Male (Locking)
Power
-
Power Sources : Phantom Power
-
Operating Voltage : 11 to 52 V (Phantom Power)